CVE-2026-85035: Use-after-free via dynamically allocated message queue retained by the CAN RX filter
Noroxi assessment
Priority: Monitor (action score 35/100)
- The sources we track (CISA KEV, Exploit-DB, Metasploit, Nuclei, GitHub) show no public exploit code or exploitation in the wild.
- Probability of exploitation in the next 30 days: 0.22% (FIRST EPSS).
- Someone with local access to the system can trigger it. A low-privileged account is enough. No user action is required. No special conditions are required; it is repeatable.
- Fixed version: zephyrproject zephyr 4.3.2, 4.5.0.
Low priority for now. Upgrade to zephyrproject zephyr 4.3.2, 4.5.0 or later.
Generated automatically from the record's data: CVSS (NVD and CNA), CISA KEV and SSVC, FIRST EPSS, exploit sources, fixed versions. How we calculate it
Primary sources: NVD · CVE.org · FIRST EPSS
The can_add_rx_filter_msgq() system call installs a CAN RX filter whose callback (can_msgq_put() in drivers/can/can_common.c) is handed the caller's struct k_msgq * as user_data. The controller driver stores that raw pointer in its filter table and dereferences it from the RX path every time a matching frame arrives. The system call verifier z_vrfy_can_add_rx_filter_msgq() in drivers/can/can_handlers.c validated the queue only with K_SYSCALL_OBJ(), which is a point-in-time check of type, initialization and caller permission and says nothing about the object's lifetime. On a build with CONFIG_USERSPACE=y and CONFIG_DYNAMIC_OBJECTS=y, an unprivileged user-mode thread that has been granted access to a CAN device can obtain a message queue whose lifetime it fully controls: k_object_alloc(K_OBJ_MSGQ) followed by k_msgq_alloc_init(). The lifetime of such an object is driven solely by its permission bitmask, and a pointer retained by the kernel is not represented there. After registering the filter, the thread calls k_object_release() — or simply terminates — and unref_check() frees the struct k_msgq storage while the CAN driver still holds the pointer. The next matching CAN frame causes k_msgq_put() to run in supervisor context against freed memory that the attacker can have groomed with another kernel allocation: the frame payload is memcpy()d through the reused block's write_ptr, and the queue's wait_q (and poll_events under CONFIG_POLL) list nodes are manipulated. This yields kernel-heap corruption reachable from a user-mode thread, defeating the isolation CONFIG_USERSPACE is intended to provide; the same dangling pointer also arises benignly when an application thread exits without calling can_remove_rx_filter(). The fix validates the queue with K_SYSCALL_OBJ_STATIC(), which additionally rejects objects carrying K_OBJ_FLAG_ALLOC, so only statically defined queues (CAN_MSGQ_DEFINE()) may be registered from user mode. Supervisor-mode callers bypass the verifier and must themselves keep the queue valid until the filter is removed.
- Published
- Nov 3, 2026
- Updated
- Nov 3, 2026
- EPSS
- 0.2% · 13th percentile
- CWE
- CWE-416
Report tools
Action score
35
Low priority for now.
- CVSS
- 35 / 40 · 8.8 / 10
- CISA KEV
- 0 / 30 · Not listed
- EPSS
- 0 / 30 · 0.2%
CISA SSVC decision
- Exploitation
- none
- Automatable
- no
- Technical impact
- total
Vulnrichment: CISA's decision-tree inputs.
CNA vs NVD score
- NVD
- —
- CNA · zephyr
- 8.8
- NVD has not scored this yet; the score shown is the CNA’s.
The score given by the assigning authority versus NVD’s independent score. A gap means the severity is contested.
Get told when this record changes
- Not in KEV: no record of exploitation in the wild
- No public exploit code on record
- A fix has been released
If any of these changes, we'll tell you in the daily email digest.
Is your version affected? Check itNoroxi analysis
What does it mean in your environment?
The assessment above is generated automatically from the record's data; it doesn't know your environment. Our team verifies on your systems whether this vulnerability is actually exploitable and which mitigation is enough.
We use this product, ask for helpAffected systems
Is your version affected?
Pick the product and type the version you run. It's compared with this record's version ranges in your browser; the version isn't sent anywhere.
—
Versions reported by the vendor
Affected version ranges reported by the assigning authority (zephyr). Independent of NVD's CPE analysis and usually ahead of it.
zephyrproject zephyr
- 1.14.0 and later · before 4.3.2affected · semver
- 4.4.0 and later · before 4.5.0affected · semver
Same product
zephyrproject: all recordsOther highest-scoring records for the same primary product.
- CVE-2023-4260Potential off-by-one buffer overflow vulnerability in the Zephyr FS subsystem40Plan
- CVE-2021-3625Buffer overflow in Zephyr USB DFU DNLOAD40Plan
- CVE-2020-10071Insufficient publish message length validation in MQTT40Plan
Published before and after this one in the same product
- ← EarlierCVE-2026-85033Nov 3, 2026 · Bluetooth Classic AVRCP Target: missing TX cleanup on disconnect permanently stalls vendor-dependent responses and leaks them to the next peer18Monitor
- ← EarlierCVE-2026-85034Nov 3, 2026 · Out-of-bounds write in the Bluetooth GATT client: oversized notification and indication values delivered to subscribers26Monitor
- Later →CVE-2026-16511Nov 4, 2026 · Unvalidated user pointers in RTIO syscall verifiers allow a user-mode thread to write kernel memory35Monitor
Remediation
Which version to upgrade to
Fix versions compiled from the vendor, package registries and Microsoft. Verify the vendor's note before upgrading.
| Product / package | Fixed version | Source |
|---|---|---|
| zephyrproject zephyr | 4.3.2 | Vendor (CNA) |
| zephyrproject zephyr | 4.5.0 | Vendor (CNA) |
Exploit status
No known public exploit
No public exploit has been observed yet. That doesn't mean you're safe, only that the bar is a little higher.
Research context
For pentesters and researchers: attack profile, score disagreement, timeline, patch commits, credits, variant and chain candidates, bug bounty scope. All derived from existing data; no exploit code.
Timeline
From publication to today: proof of concept, Metasploit module, CISA KEV and fix record. Dates are as reported by the sources.
- Published
- Fix recordedsame day
- TodayNov 16, 2026+13 d
FIRST EPSS daily score; only changes of 0.01 or more are recorded (step chart).
Patch and commit links
Commit, PR and diff links among the references. A starting point for patch-diffing and variant hunting; fixes, not exploits.
Variant candidates
Same product, same weakness class, within 18 months. If the patch missed the root cause, the sibling bug is here.
- CVE-2026-1236681 days apartUse-after-free freeing an armed dynamically-allocated k_timer in Zephyr userspace object disposal35Monitor
- CVE-2026-7997911 days apartStale TLB entries after demand-paging page-out let arm64 user threads access reused physical frames31Monitor
- CVE-2026-10667114 days apartSMP use-after-free in Zephyr `CONFIG_USERSPACE` dynamic kernel-object tracking, reachable from unprivileged user threads31Monitor
- CVE-2026-1993523 days apartUse-after-free of an L2CAP CoC channel object in the Zephyr Bluetooth host: RX work item is not cancelled on channel teardown30Monitor
- CVE-2026-1068595 days apartUse-after-free of GATT subscribe params in Bluetooth host CCC-write response handler30Monitor
- CVE-2026-10638140 days apartUse-after-free in Zephyr ICMPv6 RX path when updating statistics after sending an echo reply or error30Monitor
Not on record for this CVE: researcher credit · public bounty program.
Technical details
Attack conditions
- Someone with local access to the system can trigger it.
- A low-privileged account is enough.
- No user action is required.
- No special conditions are required; it is repeatable.
If successful
- Confidentiality
- high · data can be read
- Integrity
- high · data or configuration can be modified
- Availability
- high · the service can be disrupted
Impact can extend beyond the vulnerable component (scope changes).
- Attack vector
- Local
- Attack complexity
- Low
- Privileges required
- Low
- User interaction
- None
- Scope
- Changed
- Confidentiality impact
- High
- Integrity impact
- High
- Availability impact
- High
Weakness class (CWE)
CWE-416 · Use After FreeCVSS vector
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H
nvd-secondary
Root cause
After a memory region is freed, another reference pointing to it is still used. By then, the same region may have been allocated for different data.
The bug in code
The whole CWE-416 classA representative example of this vulnerability class. Not the vendor's source code; it shows the faulty pattern and its fix.
Vulnerable
free(dev->buf);
/* ... another thread is still running ... */
process(dev->buf);Fixed
lock(&dev->lock);
free(dev->buf);
dev->buf = NULL;
unlock(&dev->lock);Attack context
MITRE CAPEC attack patterns and ATT&CK techniques for this weakness class (CWE). A starting point for detection rules and threat hunting.
MITRE has no CAPEC/ATT&CK mapping for this CWE.
Change log
- SSVC exploitation— → none
- Exploit maturity— → none
- Fix✗ → ✓
For records you follow, these changes also arrive as notifications. →
References
Show all references (1 more)Show less
Vendor advisories and official records. Exploit/PoC links are deliberately left out.