CVE-2026-79979: Stale TLB entries after demand-paging page-out let arm64 user threads access reused physical frames
Noroxi assessment
Priority: Monitor (action score 31/100)
- The sources we track (CISA KEV, Exploit-DB, Metasploit, Nuclei, GitHub) show no public exploit code or exploitation in the wild.
- Probability of exploitation in the next 30 days: 0.10% (FIRST EPSS).
- Someone with local access to the system can trigger it. A low-privileged account is enough. No user action is required. Special conditions such as timing or configuration are required.
- Fixed version: zephyrproject zephyr 4.5.0.
Low priority for now. Upgrade to zephyrproject zephyr 4.5.0 or later.
Generated automatically from the record's data: CVSS (NVD and CNA), CISA KEV and SSVC, FIRST EPSS, exploit sources, fixed versions. How we calculate it
Primary sources: NVD · CVE.org · FIRST EPSS
The arm64 MMU backend invalidates a single virtual address from the TLB with invalidate_tlb_page() in arch/arm64/core/mmu.c, which issued TLBI VAE1{IS} with an operand of virt >> 12. That operand encodes the ASID in bits [63:48], so the invalidation only ever matched ASID 0 (the kernel page tables) and global entries. Memory domains, however, are allocated ASIDs starting at 1 in arch_mem_domain_init(), and every domain-private leaf created by private_map() is mapped with MT_NG, i.e. non-global. A domain's cached translation therefore survived the invalidation. All callers of invalidate_tlb_page() are demand-paging paths. When the eviction algorithm reclaims a frame, page_frame_prepare_locked() in kernel/mmu.c calls arch_mem_page_out(), which marks the kernel leaf invalid, propagates the invalid descriptor into every domain via sync_domains(), and then flushes only ASID 0. do_page_fault() immediately reuses the very same page frame for the incoming mapping through arch_mem_page_in(). A user thread that had already touched the evicted page — a k_mem_partition added with arch_mem_domain_partition_add(), or its own stack mapped by map_thread_stack() — retains a valid EL0 read/write translation to that physical frame under its own ASID. Unprivileged code running in a user thread can drive memory pressure to force eviction and then keep accessing the stale address, obtaining read and write access to whatever the kernel subsequently placed in that frame: supervisor data, another memory domain's partition, or another thread's stack. This defeats the isolation that CONFIG_USERSPACE is meant to enforce, allowing information disclosure and memory corruption up to full compromise of the system. The fix switches the implementation to TLBI VAAE1{IS}, which matches every ASID and both global and non-global entries, so no domain-tagged translation survives a page out, dirty-bit update or access-flag clear. Exploitation requires an arm64 build with both CONFIG_USERSPACE and CONFIG_DEMAND_PAGING enabled, an active backing store, and at least one demand-paged page that is also privately mapped into a user memory domain. The same commit additionally stops globalize_table() from stripping EL0 permission and non-global attributes off domain-private leaves during paging synchronization, which previously caused user threads to lose access to their own partitions and stacks.
- Published
- Oct 23, 2026
- Updated
- Nov 2, 2026
- EPSS
- 0.1% · 0th percentile
- CWE
- CWE-416
Report tools
Action score
31
Monitor
Low priority for now.
- CVSS
- 31 / 40 · 7.8 / 10
- CISA KEV
- 0 / 30 · Not listed
- EPSS
- 0 / 30 · 0.1%
CISA SSVC decision
- Exploitation
- none
- Automatable
- no
- Technical impact
- total
Vulnrichment: CISA's decision-tree inputs.
CNA vs NVD score
- NVD
- —
- CNA · zephyr
- 7.8
- NVD has not scored this yet; the score shown is the CNA’s.
The score given by the assigning authority versus NVD’s independent score. A gap means the severity is contested.
Get told when this record changes
- Not in KEV: no record of exploitation in the wild
- No public exploit code on record
- A fix has been released
If any of these changes, we'll tell you in the daily email digest.
Running WordPress? Scan your site free with WP Lens
Noroxi analysis
What does it mean in your environment?
The assessment above is generated automatically from the record's data; it doesn't know your environment. Our team verifies on your systems whether this vulnerability is actually exploitable and which mitigation is enough.
We use this product, ask for helpAffected systems
Is your version affected?
Pick the product and type the version you run. It's compared with this record's version ranges in your browser; the version isn't sent anywhere.
—
Versions reported by the vendor
Affected version ranges reported by the assigning authority (zephyr). Independent of NVD's CPE analysis and usually ahead of it.
zephyrproject zephyr
- 4.3.0 and later · before 4.5.0affected · semver
Same product
zephyrproject: all recordsOther highest-scoring records for the same primary product.
- CVE-2023-4260Potential off-by-one buffer overflow vulnerability in the Zephyr FS subsystem40Plan
- CVE-2021-3625Buffer overflow in Zephyr USB DFU DNLOAD40Plan
- CVE-2020-10071Insufficient publish message length validation in MQTT40Plan
Published before and after this one in the same product
- ← EarlierCVE-2026-79977Oct 23, 2026 · WireGuard peer endpoint learned from unauthenticated transport-data messages allows off-path tunnel hijack in Zephyr32Monitor
- ← EarlierCVE-2026-79978Oct 23, 2026 · Out-of-bounds write in the ADXL345 sensor driver RTIO streaming FIFO read path14Monitor
- Later →CVE-2026-79980Oct 23, 2026 · Predictable and reused DHCPv4 transaction identifier allows spoofed DHCP replies to reconfigure gateway and DNS22Monitor
Remediation
Which version to upgrade to
Fix versions compiled from the vendor, package registries and Microsoft. Verify the vendor's note before upgrading.
| Product / package | Fixed version | Source |
|---|---|---|
| zephyrproject zephyr | 4.5.0 | Vendor (CNA) |
Exploit status
No known public exploit
No public exploit has been observed yet. That doesn't mean you're safe, only that the bar is a little higher.
Research context
For pentesters and researchers: attack profile, score disagreement, timeline, patch commits, credits, variant and chain candidates, bug bounty scope. All derived from existing data; no exploit code.
Timeline
From publication to today: proof of concept, Metasploit module, CISA KEV and fix record. Dates are as reported by the sources.
- Published
- Fix recordedsame day
- TodayNov 10, 2026+18 d
FIRST EPSS daily score; only changes of 0.01 or more are recorded (step chart).
Patch and commit links
Commit, PR and diff links among the references. A starting point for patch-diffing and variant hunting; fixes, not exploits.
Credits
All researchersFinders, reporters and analysts named in the CNA record. Click a name for that researcher’s other records.
No credits in the CNA record.
Variant candidates
Same product, same weakness class, within 18 months. If the patch missed the root cause, the sibling bug is here.
- CVE-2026-8503511 days apartUse-after-free via dynamically allocated message queue retained by the CAN RX filter35Monitor
- CVE-2026-1236670 days apartUse-after-free freeing an armed dynamically-allocated k_timer in Zephyr userspace object disposal35Monitor
- CVE-2026-10667103 days apartSMP use-after-free in Zephyr `CONFIG_USERSPACE` dynamic kernel-object tracking, reachable from unprivileged user threads31Monitor
- CVE-2026-1993512 days apartUse-after-free of an L2CAP CoC channel object in the Zephyr Bluetooth host: RX work item is not cancelled on channel teardown30Monitor
- CVE-2026-1068584 days apartUse-after-free of GATT subscribe params in Bluetooth host CCC-write response handler30Monitor
- CVE-2026-10638129 days apartUse-after-free in Zephyr ICMPv6 RX path when updating statistics after sending an echo reply or error30Monitor
Chain candidates
An authentication bypass and a privilege-requiring bug in the same product, published close together: combined they may become an unauthenticated path.
—
Bug bounty scope
No known public program.
Source: bounty-targets-data (public HackerOne, Bugcrowd, Intigriti, YesWeHack listings).
Technical details
Attack conditions
- Someone with local access to the system can trigger it.
- A low-privileged account is enough.
- No user action is required.
- Special conditions such as timing or configuration are required.
If successful
- Confidentiality
- high · data can be read
- Integrity
- high · data or configuration can be modified
- Availability
- high · the service can be disrupted
Impact can extend beyond the vulnerable component (scope changes).
- Attack vector
- Local
- Attack complexity
- High
- Privileges required
- Low
- User interaction
- None
- Scope
- Changed
- Confidentiality impact
- High
- Integrity impact
- High
- Availability impact
- High
Weakness class (CWE)
CWE-416 · Use After FreeCVSS vector
CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:H/A:H
nvd-secondary
Root cause
After a memory region is freed, another reference pointing to it is still used. By then, the same region may have been allocated for different data.
The bug in code
The whole CWE-416 classA representative example of this vulnerability class. Not the vendor's source code; it shows the faulty pattern and its fix.
Vulnerable
free(dev->buf);
/* ... another thread is still running ... */
process(dev->buf);Fixed
lock(&dev->lock);
free(dev->buf);
dev->buf = NULL;
unlock(&dev->lock);Attack context
MITRE CAPEC attack patterns and ATT&CK techniques for this weakness class (CWE). A starting point for detection rules and threat hunting.
MITRE has no CAPEC/ATT&CK mapping for this CWE.
Change log
- SSVC exploitation— → none
- Exploit maturity— → none
- Fix✗ → ✓
For records you follow, these changes also arrive as notifications. →
References
Show all references (1 more)Show less
Vendor advisories and official records. Exploit/PoC links are deliberately left out.