Skip to content
Noroxi
NVD / CVE Program· CNA zephyr

CVE-2026-10683: DesignWare I2C target driver can be wedged into a permanent stuck state by an on-bus master (DoS)

Noroxi assessment

Priority: Monitor (action score 18/100)

  • The sources we track (CISA KEV, Exploit-DB, Metasploit, Nuclei, GitHub) show no public exploit code or exploitation in the wild.
  • Probability of exploitation in the next 30 days: 0.24% (FIRST EPSS).
  • Physical access to the device is required. No account or password is required. No user action is required. No special conditions are required; it is repeatable.
  • Fixed version: zephyrproject zephyr 4.3.2, 4.4.2.
  • Severity is disputed: the assigning authority (CNA) scores it 2.4, NVD 4.6.
  • Mentioned 1 time in Turkish national cyber security advisories (siberguvenlik.gov.tr).

Low priority for now. Upgrade to zephyrproject zephyr 4.3.2, 4.4.2 or later.

Generated automatically from the record's data: CVSS (NVD and CNA), CISA KEV and SSVC, FIRST EPSS, exploit sources, fixed versions. How we calculate it

Primary sources: NVD · CVE.org · FIRST EPSS

In the Synopsys DesignWare I2C driver (drivers/i2c/i2c_dw.c) operating in target/slave mode, the rx_full interrupt handler gates the write_requested() callback on dw->state != CMD_SEND, and dw->state is only reset to READY on a STOP interrupt. The START_DET interrupt, whose handler in i2c_dw_slave_read_clear_intr_bits() would reset the state on every (re)START, was never added to the enabled interrupt mask in i2c_dw_slave_register(), so that recovery path was dead code. As a result, if the STOP interrupt is lost (bus glitch/reset, or a concurrent master driving STOP) or the bus master issues a legal WRITE-repeated-START-WRITE sequence with the same direction, the driver remains in CMD_SEND permanently and never invokes write_requested() again for the life of the target. An I2C master on the same physical bus can deliberately trigger this, causing the I2C target function to malfunction for all subsequent write transactions and desynchronizing consumer framing state (e.g. MCTP-over-I2C), a recoverable-by-reset denial of service of the target peripheral. The fix unmasks START_DET so the state is reset at every bus (re)START. Impact is availability-only over a local board-level bus; no memory corruption results in the in-tree consumer, whose per-byte buffer write is independently bounds-checked.

MediumCVSS 4.6 · v3.1—No exploit Fix available
Published
Jul 27, 2026
Updated
Nov 4, 2026
EPSS
0.2% · 15th percentile

Report tools

JSON

Action score

18

Monitor

Low priority for now.

CVSS
18 / 40 · 4.6 / 10
CISA KEV
0 / 30 · Not listed
EPSS
0 / 30 · 0.2%

CISA SSVC decision

Exploitation
none
Automatable
no
Technical impact
partial

Vulnrichment: CISA's decision-tree inputs.

CNA vs NVD score

NVD
4.6
CNA · zephyr
2.4
2.2 point gap

CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L

The score given by the assigning authority versus NVD’s independent score. A gap means the severity is contested.

Get told when this record changes

  • Not in KEV: no record of exploitation in the wild
  • No public exploit code on record
  • A fix has been released

If any of these changes, we'll tell you in the daily email digest.

Follow CVE-2026-10683

When you'll hear from us

  • when it enters CISA KEV
  • when exploit code appears or is weaponized
  • when the record is updated (including a fixed version)
  • when EPSS rises 20 points in a week

One daily email digest (06:00 UTC); connect a webhook for KEV listings and weaponized exploits instantly.

Your free account also gets you

Running WordPress? Scan your site free with WP Lens

  • Stack alerts: add the products and versions you run, get the new CVEs that affect them
  • Uptime monitoring: 1 site, instant email when it goes down
  • Add your domain: subdomains and takeover risk scanned every week (1 domain)
  • 10 scans an hour on the security tools (3 a day without an account), an API key and MCP
  • All your scans in one panel: findings, what changed in the last scan, a report per domain or per client (PDF, share link)
All free tools

Sign up with email · Have an account? Sign in

Free account, no card. Unfollow any time.

Don't want an account? Get "Exploited this week" by email every MondayDon't want an account? RSS feed for zephyrproject records

Running WordPress? Scan your site free with WP Lens

Is your version affected? Check it

Noroxi analysis

What does it mean in your environment?

The assessment above is generated automatically from the record's data; it doesn't know your environment. Our team verifies on your systems whether this vulnerability is actually exploitable and which mitigation is enough.

We use this product, ask for help

Affected systems

Is your version affected?

Pick the product and type the version you run. It's compared with this record's version ranges in your browser; the version isn't sent anywhere.

VendorProduct
zephyrprojectzephyr

Affected versions

NVD version ranges (for catalog products). Add the product to your stack with a version and matching uses these.

  • zephyrproject zephyr4.0.0 and later · before 4.5.0

Versions reported by the vendor

Affected version ranges reported by the assigning authority (zephyr). Independent of NVD's CPE analysis and usually ahead of it.

  • zephyrproject zephyr

    • 4.0.0 and later · before 4.3.2affected · semver
    • 4.4.0 and later · before 4.4.2affected · semver

Same product

zephyrproject: all records

Other highest-scoring records for the same primary product.

  • CVE-2023-4260Potential off-by-one buffer overflow vulnerability in the Zephyr FS subsystem
    40Plan
  • CVE-2021-3625Buffer overflow in Zephyr USB DFU DNLOAD
    40Plan
  • CVE-2020-10071Insufficient publish message length validation in MQTT
    40Plan

Published before and after this one in the same product

  • ← EarlierCVE-2026-10681Jul 25, 2026 · SMP race in `thread_idx_alloc()` lets concurrent `k_object_alloc(K_OBJ_THREAD)` callers share a kernel-object permission slot
    28Monitor
  • ← EarlierCVE-2026-10682Jul 27, 2026 · Out-of-bounds write in Zephyr `log_filter_set` syscall verifier reachable from userspace
    31Monitor
  • Later →CVE-2026-10684Jul 29, 2026 · Out-of-bounds read in coredump shell when printing stored-dump target code
    12Monitor

Remediation

Which version to upgrade to

Fix versions compiled from the vendor, package registries and Microsoft. Verify the vendor's note before upgrading.

Product / packageFixed versionSource
zephyrproject zephyr4.3.2Vendor (CNA)
zephyrproject zephyr4.4.2Vendor (CNA)

Exploit status

No known public exploit

No public exploit has been observed yet. That doesn't mean you're safe, only that the bar is a little higher.

Research context

For pentesters and researchers: attack profile, score disagreement, timeline, patch commits, credits, variant and chain candidates, bug bounty scope. All derived from existing data; no exploit code.

Timeline

From publication to today: proof of concept, Metasploit module, CISA KEV and fix record. Dates are as reported by the sources.

No dated events beyond publication.

EPSS, last 120 days

FIRST EPSS daily score; only changes of 0.01 or more are recorded (step chart).

Patch and commit links

Commit, PR and diff links among the references. A starting point for patch-diffing and variant hunting; fixes, not exploits.

Credits

All researchers

Finders, reporters and analysts named in the CNA record. Click a name for that researcher’s other records.

No credits in the CNA record.

Variant candidates

Same product, same weakness class, within 18 months. If the patch missed the root cause, the sibling bug is here.

  • CVE-2026-106864 days apartMissing hop-limit decrement on IPv6 forwarding path allows unbounded packet looping (DoS) in Zephyr routers
    30Monitor
  • CVE-2025-2962398 days apartInfinite loop in dns_copy_qname
    30Monitor
  • CVE-2026-1223617 days apartInfinite loop (DoS) in Bluetooth GATT client parsing of Read-By-Type responses with zero data length
    26Monitor
  • CVE-2026-1064233 days apartUnbounded TX busy-loop DoS in Zephyr PL011 UART driver under CTS hardware flow control
    26Monitor
  • CVE-2026-4179133 days apartstm32: usb: Infinite while loop in Interrupt Handler
    24Monitor
  • CVE-2026-1262921 days apartPL011 UART error interrupts never cleared, enabling an external-peer interrupt-storm denial of service
    18Monitor

Chain candidates

An authentication bypass and a privilege-requiring bug in the same product, published close together: combined they may become an unauthenticated path.

—

Bug bounty scope

No known public program.

Source: bounty-targets-data (public HackerOne, Bugcrowd, Intigriti, YesWeHack listings).

National notice (Türkiye Cybersecurity Directorate / USOM)

Official security notices citing this record; remediation advice is on the agency's page.

All national notices →

Technical details

Attack conditions

  • Physical access to the device is required.
  • No account or password is required.
  • No user action is required.
  • No special conditions are required; it is repeatable.

If successful

Confidentiality
none
Integrity
none
Availability
high · the service can be disrupted
Attack vector
Physical
Attack complexity
Low
Privileges required
None
User interaction
None
Scope
Unchanged
Confidentiality impact
None
Integrity impact
None
Availability impact
High

Weakness class (CWE)

CWE-835 · Loop with Unreachable Exit Condition ('Infinite Loop')

CVSS vector

CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

nvd-primary

Attack context

MITRE CAPEC attack patterns and ATT&CK techniques for this weakness class (CWE). A starting point for detection rules and threat hunting.

MITRE has no CAPEC/ATT&CK mapping for this CWE.

Change log

  1. Fix✗ → ✓

For records you follow, these changes also arrive as notifications. →

References

Vendor advisories and official records. Exploit/PoC links are deliberately left out.

All records