Skip to content
Noroxi
NVD / CVE Program· CNA zephyr

CVE-2026-10642: Unbounded TX busy-loop DoS in Zephyr PL011 UART driver under CTS hardware flow control

Noroxi assessment

Priority: Monitor (action score 26/100)

  • The sources we track (CISA KEV, Exploit-DB, Metasploit, Nuclei, GitHub) show no public exploit code or exploitation in the wild.
  • Probability of exploitation in the next 30 days: 0.28% (FIRST EPSS).
  • Someone on the same network segment can trigger it. No account or password is required. No user action is required. No special conditions are required; it is repeatable.
  • Fixed version: zephyrproject zephyr 4.3.1, 4.4.2.

Low priority for now. Upgrade to zephyrproject zephyr 4.3.1, 4.4.2 or later.

Generated automatically from the record's data: CVSS (NVD and CNA), CISA KEV and SSVC, FIRST EPSS, exploit sources, fixed versions. How we calculate it

Primary sources: NVD · CVE.org · FIRST EPSS

The Zephyr PL011 UART driver (drivers/serial/uart_pl011.c) contains an unbounded software loop in pl011_irq_tx_enable() that repeatedly invokes the interrupt-driven application callback while the TX interrupt mask bit (PL011_IMSC_TXIM) is set, to work around the controller's level-transition TX-interrupt behavior. When CTS hardware flow control is enabled (devicetree hw-flow-control or runtime UART_CFG_FLOW_CTRL_RTS_CTS) and the wired serial peer de-asserts CTS, the controller stops draining the TX FIFO; pl011_fifo_fill() then returns 0 on every call while the application still has pending data and therefore never disables the TX interrupt. The loop condition never clears, so the thread that called uart_irq_tx_enable() (e.g. h4_send() in the Bluetooth HCI H4 driver) spins indefinitely, hanging the executing context and stalling the transport — a denial of service (CWE-835). An attacker controlling the device attached to the UART's CTS line can trigger the hang by withholding CTS during transmission. Because that peer is the device wired to the UART — which may be a removable or external module (e.g. an off-board Bluetooth controller on the HCI H4 link) rather than a permanently-bonded on-PCB part — the attack vector is scored Adjacent (AV:A) rather than Physical; the security subcommittee should confirm the vector against the specific deployment. Impact is availability only; there is no memory-safety, confidentiality, or integrity consequence. The vulnerable loop was introduced in commit b783bc8448ef (Feb 2025) and shipped in releases v4.1.0 through v4.4.0. The fix breaks out of the loop when CTS is blocking and arms the CTS modem-status interrupt to resume transmission when CTS re-asserts.

MediumCVSS 6.5 · v3.1—No exploit Fix available
Published
Jun 24, 2026
Updated
Nov 4, 2026
EPSS
0.2% · 20th percentile

Report tools

JSON

Action score

26

Monitor

Low priority for now.

CVSS
26 / 40 · 6.5 / 10
CISA KEV
0 / 30 · Not listed
EPSS
0 / 30 · 0.2%

CISA SSVC decision

Exploitation
none
Automatable
no
Technical impact
partial

Vulnrichment: CISA's decision-tree inputs.

CNA vs NVD score

NVD
—
CNA · zephyr
6.5
NVD has not scored this yet; the score shown is the CNA’s.

The score given by the assigning authority versus NVD’s independent score. A gap means the severity is contested.

Get told when this record changes

  • Not in KEV: no record of exploitation in the wild
  • No public exploit code on record
  • A fix has been released

If any of these changes, we'll tell you in the daily email digest.

Follow CVE-2026-10642

When you'll hear from us

  • when it enters CISA KEV
  • when exploit code appears or is weaponized
  • when the record is updated (including a fixed version)
  • when EPSS rises 20 points in a week

One daily email digest (06:00 UTC); connect a webhook for KEV listings and weaponized exploits instantly.

Your free account also gets you

Running WordPress? Scan your site free with WP Lens

  • Stack alerts: add the products and versions you run, get the new CVEs that affect them
  • Uptime monitoring: 1 site, instant email when it goes down
  • Add your domain: subdomains and takeover risk scanned every week (1 domain)
  • 10 scans an hour on the security tools (3 a day without an account), an API key and MCP
  • All your scans in one panel: findings, what changed in the last scan, a report per domain or per client (PDF, share link)
All free tools

Sign up with email · Have an account? Sign in

Free account, no card. Unfollow any time.

Don't want an account? Get "Exploited this week" by email every MondayDon't want an account? RSS feed for zephyrproject records

Running WordPress? Scan your site free with WP Lens

Is your version affected? Check it

Noroxi analysis

What does it mean in your environment?

The assessment above is generated automatically from the record's data; it doesn't know your environment. Our team verifies on your systems whether this vulnerability is actually exploitable and which mitigation is enough.

We use this product, ask for help

Affected systems

Is your version affected?

Pick the product and type the version you run. It's compared with this record's version ranges in your browser; the version isn't sent anywhere.

VendorProduct
zephyrprojectzephyr

Affected versions

NVD version ranges (for catalog products). Add the product to your stack with a version and matching uses these.

  • zephyrproject zephyr4.1.0 and later · before 4.5.0

Versions reported by the vendor

Affected version ranges reported by the assigning authority (zephyr). Independent of NVD's CPE analysis and usually ahead of it.

  • zephyrproject zephyr

    • 4.1.0 and later · before 4.3.1affected · semver
    • 4.4.0 and later · before 4.4.2affected · semver

Same product

zephyrproject: all records

Other highest-scoring records for the same primary product.

  • CVE-2023-4260Potential off-by-one buffer overflow vulnerability in the Zephyr FS subsystem
    40Plan
  • CVE-2021-3625Buffer overflow in Zephyr USB DFU DNLOAD
    40Plan
  • CVE-2020-10071Insufficient publish message length validation in MQTT
    40Plan

Published before and after this one in the same product

  • ← EarlierCVE-2026-10651Jun 23, 2026 · Out-of-bounds read in Bluetooth Classic SDP attribute parsing (`bt_sdp_parse_attribute`)
    26Monitor
  • ← EarlierCVE-2026-10658Jun 23, 2026 · Out-of-bounds access in Bluetooth ISO receive (`bt_iso_recv`) due to missing SDU-header length validation
    28Monitor
  • Later →CVE-2026-13351Jun 25, 2026 · net: Maliciously fragmented IPv6 packets can prevent receiving/processing future incoming packets
    30Monitor

Remediation

Which version to upgrade to

Fix versions compiled from the vendor, package registries and Microsoft. Verify the vendor's note before upgrading.

Product / packageFixed versionSource
zephyrproject zephyr4.3.1Vendor (CNA)
zephyrproject zephyr4.4.2Vendor (CNA)

Exploit status

No known public exploit

No public exploit has been observed yet. That doesn't mean you're safe, only that the bar is a little higher.

Research context

For pentesters and researchers: attack profile, score disagreement, timeline, patch commits, credits, variant and chain candidates, bug bounty scope. All derived from existing data; no exploit code.

Timeline

From publication to today: proof of concept, Metasploit module, CISA KEV and fix record. Dates are as reported by the sources.

No dated events beyond publication.

No history yet (it accumulates with the daily EPSS job).

Patch and commit links

Commit, PR and diff links among the references. A starting point for patch-diffing and variant hunting; fixes, not exploits.

Credits

All researchers

Finders, reporters and analysts named in the CNA record. Click a name for that researcher’s other records.

No credits in the CNA record.

Variant candidates

Same product, same weakness class, within 18 months. If the patch missed the root cause, the sibling bug is here.

  • CVE-2026-1068637 days apartMissing hop-limit decrement on IPv6 forwarding path allows unbounded packet looping (DoS) in Zephyr routers
    30Monitor
  • CVE-2025-2962365 days apartInfinite loop in dns_copy_qname
    30Monitor
  • CVE-2026-1223650 days apartInfinite loop (DoS) in Bluetooth GATT client parsing of Read-By-Type responses with zero data length
    26Monitor
  • CVE-2026-4179100 days apartstm32: usb: Infinite while loop in Interrupt Handler
    24Monitor
  • CVE-2026-1068333 days apartDesignWare I2C target driver can be wedged into a permanent stuck state by an on-bus master (DoS)
    18Monitor
  • CVE-2026-1262954 days apartPL011 UART error interrupts never cleared, enabling an external-peer interrupt-storm denial of service
    18Monitor

Chain candidates

An authentication bypass and a privilege-requiring bug in the same product, published close together: combined they may become an unauthenticated path.

—

Bug bounty scope

No known public program.

Source: bounty-targets-data (public HackerOne, Bugcrowd, Intigriti, YesWeHack listings).

Technical details

Attack conditions

  • Someone on the same network segment can trigger it.
  • No account or password is required.
  • No user action is required.
  • No special conditions are required; it is repeatable.

If successful

Confidentiality
none
Integrity
none
Availability
high · the service can be disrupted
Attack vector
Adjacent
Attack complexity
Low
Privileges required
None
User interaction
None
Scope
Unchanged
Confidentiality impact
None
Integrity impact
None
Availability impact
High

Weakness class (CWE)

CWE-835 · Loop with Unreachable Exit Condition ('Infinite Loop')

CVSS vector

CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

nvd-secondary

Attack context

MITRE CAPEC attack patterns and ATT&CK techniques for this weakness class (CWE). A starting point for detection rules and threat hunting.

MITRE has no CAPEC/ATT&CK mapping for this CWE.

Change log

  1. CVSS4.6 → 6.5
  2. Fix✗ → ✓

For records you follow, these changes also arrive as notifications. →

References

Vendor advisories and official records. Exploit/PoC links are deliberately left out.

All records