Skip to content
Noroxi
NVD / CVE Program· CNA zephyr

CVE-2026-10655: Use-after-free race in SNTP async client when closing the socket while the socket service is still polling it

MediumCVSS 5.9 · v3.1—No exploit Fix available

Noroxi assessment

Priority: Monitor (action score 23/100)

  • The sources we track (CISA KEV, Exploit-DB, Metasploit, Nuclei, GitHub) show no public exploit code or exploitation in the wild.
  • Probability of exploitation in the next 30 days: 0.38% (FIRST EPSS).
  • Anyone who can reach it over the internet can trigger it. No account or password is required. No user action is required. Special conditions such as timing or configuration are required.
  • Fixed version: zephyrproject zephyr 4.3.1, 4.4.2.

Low priority for now. Upgrade to zephyrproject zephyr 4.3.1, 4.4.2 or later.

Generated automatically from the record's data: CVSS (NVD and CNA), CISA KEV and SSVC, FIRST EPSS, exploit sources, fixed versions. How we calculate it

Primary sources: NVD · CVE.org · FIRST EPSS

The asynchronous SNTP client in Zephyr (subsys/net/lib/sntp/sntp.c, sntp_close_async) closed the UDP socket file descriptor directly from the calling thread immediately after detaching it from the network socket service, without synchronizing with the socket-service poll thread. The socket service thread polls each socket via zvfs_poll, which (in zsock_poll_prepare_ctx) registers a k_poll_event pointing into the socket's net_context (&ctx->recv_q) and then blocks in k_poll without holding a reference or lock. net_context objects are allocated from a fixed pool (contexts[CONFIG_NET_MAX_CONTEXTS]) and reused after close. When sntp_close_async is invoked from a different thread than the poll thread (in the in-tree consumer subsys/net/lib/config/init_clock_sntp.c, the SNTP timeout handler runs on the system workqueue while the socket service thread is blocked in poll on the same fd), the close frees and may reuse the net_context while the poll thread still has a poller node linked into the freed object, resulting in a use-after-free / object confusion of kernel poll structures. The SNTP timeout path is the normal no-response failure mode, so a network peer or off-path attacker who drops or delays the SNTP/NTP response can drive the racing close repeatedly (and periodically with NET_CONFIG_SNTP_INIT_RESYNC). The most likely consequence is a crash of the networking thread (denial of service), with potential memory corruption when the freed context slot is reallocated. The fix defers the close to the socket service thread itself via net_socket_service_close (NET_SOCKET_SERVICE_CLOSE_SOCKETS), so the same thread that polls performs the close, eliminating the race. Affected releases: v4.2.0 through v4.4.0.

Published
Jun 30, 2026
Updated
Oct 25, 2026
EPSS
0.3% · 32th percentile

Report tools

JSON

Action score

23

Monitor

Low priority for now.

CVSS
23 / 40 · 5.9 / 10
CISA KEV
0 / 30 · Not listed
EPSS
0 / 30 · 0.3%

CISA SSVC decision

Exploitation
none
Automatable
no
Technical impact
partial

Vulnrichment: CISA's decision-tree inputs.

CNA vs NVD score

NVD
5.9
CNA · zephyr
6.5
0.6 point gap

CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:H

The score given by the assigning authority versus NVD’s independent score. A gap means the severity is contested.

Get told when this record changes

  • Not in KEV: no record of exploitation in the wild
  • No public exploit code on record
  • A fix has been released

If any of these changes, we'll tell you in the daily email digest.

Follow CVE-2026-10655

When you'll hear from us

  • when it enters CISA KEV
  • when exploit code appears or is weaponized
  • when the record is updated (including a fixed version)
  • when EPSS rises 20 points in a week

One daily email digest (06:00 UTC); connect a webhook for KEV listings and weaponized exploits every 10 minutes on paid plans, on the hour on the free plan.

Your free account also gets you

  • CVE alerts: add the products and versions you run, get the new CVEs that affect them
  • Uptime monitoring: 1 site, instant email when it goes down
  • Add your domain: subdomains and takeover risk scanned every week (1 domain)
  • 10 scans an hour on the security tools, at most 30 a day (3 a day without an account), an API key and MCP
  • All your scans in one panel: findings, what changed in the last scan, a report per domain or per client (PDF, share link)
All free tools

Sign up with email · Have an account? Sign in

Free account, no card. Unfollow any time.

Don't want an account? Get "Exploited this week" by email every MondayDon't want an account? RSS feed for zephyrproject records
Is your version affected? Check it

Noroxi analysis

What does it mean in your environment?

The assessment above is generated automatically from the record's data; it doesn't know your environment. Our team verifies on your systems whether this vulnerability is actually exploitable and which mitigation is enough.

We use this product, ask for help

Affected systems

Is your version affected?

Pick the product and type the version you run. It's compared with this record's version ranges in your browser; the version isn't sent anywhere.

VendorProduct
zephyrprojectzephyr

Versions reported by the vendor

Affected version ranges reported by the assigning authority (zephyr). Independent of NVD's CPE analysis and usually ahead of it.

  • zephyrproject zephyr

    • 4.2.0 and later · before 4.3.1affected · semver
    • 4.4.0 and later · before 4.4.2affected · semver

Affected versions

NVD version ranges (for catalog products). Add the product to your stack with a version and matching uses these.

  • zephyrproject zephyr4.2.0 and later · up to 4.4.1 inclusive

Same product

zephyrproject: all records

Other highest-scoring records for the same primary product.

  • CVE-2023-4260Potential off-by-one buffer overflow vulnerability in the Zephyr FS subsystem
    40Plan
  • CVE-2021-3625Buffer overflow in Zephyr USB DFU DNLOAD
    40Plan
  • CVE-2020-10071Insufficient publish message length validation in MQTT
    40Plan

Published before and after this one in the same product

  • ← EarlierCVE-2026-10653Jun 30, 2026 · Non-atomic `net_buf` reference counts cause double-free / free-list corruption under concurrent unref
    32Monitor
  • ← EarlierCVE-2026-10654Jun 30, 2026 · RFCOMM session-disconnect race leaks session/L2CAP and denies further RFCOMM service in Zephyr Bluetooth Classic
    12Monitor
  • Later →CVE-2026-9263Jun 30, 2026 · Out-of-bounds read in Bluetooth Controller ISOAL framed RX reassembly leaks adjacent memory into host HCI ISO packets
    32Monitor

Remediation

Which version to upgrade to

Fix versions compiled from the vendor, package registries and Microsoft. Verify the vendor's note before upgrading.

Product / packageFixed versionSource
zephyrproject zephyr4.3.1Vendor (CNA)
zephyrproject zephyr4.4.2Vendor (CNA)

Exploit status

No known public exploit

No public exploit has been observed yet. That doesn't mean you're safe, only that the bar is a little higher.

Research context

For pentesters and researchers: attack profile, score disagreement, timeline, patch commits, credits, variant and chain candidates, bug bounty scope. All derived from existing data; no exploit code.

Timeline

From publication to today: proof of concept, Metasploit module, CISA KEV and fix record. Dates are as reported by the sources.

No dated events beyond publication.

Patch and commit links

Commit, PR and diff links among the references. A starting point for patch-diffing and variant hunting; fixes, not exploits.

Variant candidates

Same product, same weakness class, within 18 months. If the patch missed the root cause, the sibling bug is here.

  • CVE-2026-1236645 days apartUse-after-free freeing an armed dynamically-allocated k_timer in Zephyr userspace object disposal
    35Monitor
  • CVE-2026-85035126 days apartUse-after-free via dynamically allocated message queue retained by the CAN RX filter
    35Monitor
  • CVE-2026-1066712 days apartSMP use-after-free in Zephyr `CONFIG_USERSPACE` dynamic kernel-object tracking, reachable from unprivileged user threads
    31Monitor
  • CVE-2026-79979115 days apartStale TLB entries after demand-paging page-out let arm64 user threads access reused physical frames
    31Monitor
  • CVE-2026-1063814 days apartUse-after-free in Zephyr ICMPv6 RX path when updating statistics after sending an echo reply or error
    30Monitor
  • CVE-2026-1068531 days apartUse-after-free of GATT subscribe params in Bluetooth host CCC-write response handler
    30Monitor

Not on record for this CVE: EPSS history · researcher credit · public bounty program.

Technical details

Attack conditions

  • Anyone who can reach it over the internet can trigger it.
  • No account or password is required.
  • No user action is required.
  • Special conditions such as timing or configuration are required.

If successful

Confidentiality
none
Integrity
none
Availability
high · the service can be disrupted
Attack vector
Network
Attack complexity
High
Privileges required
None
User interaction
None
Scope
Unchanged
Confidentiality impact
None
Integrity impact
None
Availability impact
High

Weakness class (CWE)

CWE-416 · Use After Free

CVSS vector

CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H

nvd-primary

Root cause

After a memory region is freed, another reference pointing to it is still used. By then, the same region may have been allocated for different data.

The bug in code

The whole CWE-416 class

A representative example of this vulnerability class. Not the vendor's source code; it shows the faulty pattern and its fix.

Vulnerable

c
free(dev->buf);/* ... another thread is still running ... */process(dev->buf);

Fixed

c
lock(&dev->lock);free(dev->buf);dev->buf = NULL;unlock(&dev->lock);

Attack context

MITRE CAPEC attack patterns and ATT&CK techniques for this weakness class (CWE). A starting point for detection rules and threat hunting.

MITRE has no CAPEC/ATT&CK mapping for this CWE.

References

Vendor advisories and official records. Exploit/PoC links are deliberately left out.

All records