Skip to content
Noroxi
NVD / CVE Program· CNA Linux

CVE-2026-74555: scsi: libsas: Fix HA resume deadlock and hisi_sas disk-wake race

Noroxi assessment

Priority: Monitor (action score 0/100)

  • The sources we track (CISA KEV, Exploit-DB, Metasploit, Nuclei, GitHub) show no public exploit code or exploitation in the wild.
  • Probability of exploitation in the next 30 days: 0.16% (FIRST EPSS).
  • Fixed version: Linux Linux 09357f067122e2e28ec52e27013a1660a1571618, 3dbbbf656b850c9c8de05df6ad4a1dfc6ff02845, 9e24b47ef81d43b3fb1b14294f09991640c79fcc.
  • Mentioned 1 time in Turkish national cyber security advisories (siberguvenlik.gov.tr).

Low priority for now. Upgrade to Linux Linux 09357f067122e2e28ec52e27013a1660a1571618, 3dbbbf656b850c9c8de05df6ad4a1dfc6ff02845, 9e24b47ef81d43b3fb1b14294f09991640c79fcc or later.

Generated automatically from the record's data: CVSS (NVD and CNA), CISA KEV and SSVC, FIRST EPSS, exploit sources, fixed versions. How we calculate it

Primary sources: NVD · CVE.org · FIRST EPSS

In the Linux kernel, the following vulnerability has been resolved: scsi: libsas: Fix HA resume deadlock and hisi_sas disk-wake race Commit fbefe22811c3 ("scsi: libsas: Don't always drain event workqueue for HA resume") introduced sas_resume_ha_no_sync() to avoid a deadlock: the PHYE_RESUME_TIMEOUT handler, running on the HA event workqueue, calls sas_deform_port() -> sas_destruct_devices(), which removes SCSI devices and waits for the host to become runtime-active. But the host cannot resume until sas_resume_ha() -> sas_drain_work() returns, and the drain is blocked on that very handler. However skipping the drain reintroduces a race: hisi_sas returns from resume before all PHY UP work and libsas discovery work finish. The controller may then autosuspend while disks are still waking up. The disks issue IO to a suspended controller, the IO fails, and the disks get disabled. Fix the deadlock at its source by moving the PHYE_RESUME_TIMEOUT notification to after sas_drain_work(). By then the host resume is about to complete, so device removal through device_link no longer blocks on the resume and the cycle is broken. With the deadlock gone, restore sas_resume_ha() (the draining variant) in hisi_sas and remove sas_resume_ha_no_sync(). The reorder is safe for the other libsas consumers (isci, pm8001, aic94xx, mvsas). During suspend, sas_suspend_devices() calls sas_notify_lldd_dev_gone() for each device, which sets dev->lldd_dev to NULL. When scsi_unblock_requests re-enables I/O in resume, any I/O to a timed-out phy's disk is immediately rejected by the LLDD before reaching hardware: isci returns SAS_DEVICE_UNKNOWN (mapped to DID_BAD_TARGET), and pm8001 returns SAS_PHY_DOWN (mapped to DID_NO_CONNECT). Both complete directly via scsi_done() without entering SCSI EH. This is identical in both the old and new ordering since lldd_dev_gone runs during suspend, before resume. The reorder only affects when the PHYE_RESUME_TIMEOUT handler runs (synchronized by sas_drain_work() vs. asynchronous after resume returns), not whether I/O can reach the device. aic94xx and mvsas do not register any PM ops and never reach this code path.

—No exploit Fix available
Published
Aug 15, 2026
Updated
Aug 19, 2026
EPSS
0.1% · 5th percentile
CWE
—

Report tools

JSON

Action score

0

Monitor

Low priority for now.

CVSS
0 / 40 · —
CISA KEV
0 / 30 · Not listed
EPSS
0 / 30 · 0.1%

Get told when this record changes

  • Not in KEV: no record of exploitation in the wild
  • No public exploit code on record
  • A fix has been released

If any of these changes, we'll tell you in the daily email digest.

Follow CVE-2026-74555

When you'll hear from us

  • when it enters CISA KEV
  • when exploit code appears or is weaponized
  • when the record is updated (including a fixed version)
  • when EPSS rises 20 points in a week

One daily email digest (06:00 UTC); connect a webhook for KEV listings and weaponized exploits instantly.

Your free account also gets you

Running WordPress? Scan your site free with WP Lens

  • Stack alerts: add the products and versions you run, get the new CVEs that affect them
  • Uptime monitoring: 1 site, instant email when it goes down
  • Add your domain: subdomains and takeover risk scanned every week (1 domain)
  • 10 scans an hour on the security tools (3 a day without an account), an API key and MCP
  • All your scans in one panel: findings, what changed in the last scan, a report per domain or per client (PDF, share link)
All free tools

Sign up with email · Have an account? Sign in

Free account, no card. Unfollow any time.

Running WordPress? Scan your site free with WP Lens

Is your version affected? Check it

Noroxi analysis

What does it mean in your environment?

The assessment above is generated automatically from the record's data; it doesn't know your environment. Our team verifies on your systems whether this vulnerability is actually exploitable and which mitigation is enough.

We use this product, ask for help

Affected systems

Is your version affected?

Pick the product and type the version you run. It's compared with this record's version ranges in your browser; the version isn't sent anywhere.

—

Versions reported by the vendor

Affected version ranges reported by the assigning authority (Linux). Independent of NVD's CPE analysis and usually ahead of it.

  • Linux Linux

    • 5.17affected
    • fbefe22811c3140a686e407e114789ebf328a9a2 and later · before 09357f067122e2e28ec52e27013a1660a1571618affected · git
    • fbefe22811c3140a686e407e114789ebf328a9a2 and later · before e50a6523a603594a6d92cdecfe11997d639410a3affected · git
    • fbefe22811c3140a686e407e114789ebf328a9a2 and later · before c391b5899dd46485a5893696c12ae3e95a3a7325affected · git
    • fbefe22811c3140a686e407e114789ebf328a9a2 and later · before 9e24b47ef81d43b3fb1b14294f09991640c79fccaffected · git
    • fbefe22811c3140a686e407e114789ebf328a9a2 and later · before b9c44a14062093e9fc2d6bddc696cfceadb482d7affected · git
    • fbefe22811c3140a686e407e114789ebf328a9a2 and later · before 3dbbbf656b850c9c8de05df6ad4a1dfc6ff02845affected · git
    • before 5.17not affected · semver
    • 6.1.183 and later · up to and including 6.1.*not affected · semver
    • 6.6.151 and later · up to and including 6.6.*not affected · semver

Package-level exposure

OSV and GitHub Advisory data: ecosystem, package and range. SBOM matching uses this table.

EcosystemPackageAffected rangeFix
Debian:12linuxbefore 6.1.187-16.1.187-1
Debian:12linux-6.12before 6.12.107-1~deb12u16.12.107-1~deb12u1
Debian:13linuxbefore 6.12.105-16.12.105-1
Debian:14linuxbefore 7.1.8-17.1.8-1

Other highest-scoring records for the same primary product.

  • CVE-2026-74705udp: fix potential use-after-free in tunnel segmentation
    40Plan
  • CVE-2026-74612veth: fix skb length accounting after XDP frag adjustment
    40Plan
  • CVE-2026-74475vxlan: use neigh_ha_snapshot() in route_shortcircuit()
    40Plan

Published before and after this one in the same product

  • ← EarlierCVE-2026-74552Aug 15, 2026 · hwmon: (lm90) Only report alarms if driver is ready
    0Monitor
  • ← EarlierCVE-2026-74553Aug 15, 2026 · hwmon: (nct6775-core) Fix number of temperature registers for NCT6116
    0Monitor
  • Later →CVE-2026-74570Aug 15, 2026 · ntfs: harden runlist realloc size calculations
    39Monitor

Remediation

Which version to upgrade to

Fix versions compiled from the vendor, package registries and Microsoft. Verify the vendor's note before upgrading.

Product / packageFixed versionSource
Linux Linux09357f067122e2e28ec52e27013a1660a1571618Vendor (CNA)
Linux Linux3dbbbf656b850c9c8de05df6ad4a1dfc6ff02845Vendor (CNA)
Linux Linux9e24b47ef81d43b3fb1b14294f09991640c79fccVendor (CNA)
Linux Linuxb9c44a14062093e9fc2d6bddc696cfceadb482d7Vendor (CNA)
Linux Linuxc391b5899dd46485a5893696c12ae3e95a3a7325Vendor (CNA)
Linux Linuxe50a6523a603594a6d92cdecfe11997d639410a3Vendor (CNA)
debian:linux6.1.187-1 · Debian:12Package registry (OSV)
debian:linux-6.126.12.107-1~deb12u1 · Debian:12Package registry (OSV)

Exploit status

No known public exploit

No public exploit has been observed yet. That doesn't mean you're safe, only that the bar is a little higher.

Research context

For pentesters and researchers: attack profile, score disagreement, timeline, patch commits, credits, variant and chain candidates, bug bounty scope. All derived from existing data; no exploit code.

Timeline

From publication to today: proof of concept, Metasploit module, CISA KEV and fix record. Dates are as reported by the sources.

No dated events beyond publication.

EPSS, last 120 days

FIRST EPSS daily score; only changes of 0.01 or more are recorded (step chart).

Patch and commit links

Commit, PR and diff links among the references. A starting point for patch-diffing and variant hunting; fixes, not exploits.

No commit or PR link among the references.

Finders, reporters and analysts named in the CNA record. Click a name for that researcher’s other records.

No credits in the CNA record.

Variant candidates

Same product, same weakness class, within 18 months. If the patch missed the root cause, the sibling bug is here.

No nightly-computed relations.

Chain candidates

An authentication bypass and a privilege-requiring bug in the same product, published close together: combined they may become an unauthenticated path.

—

Bug bounty scope

No known public program.

Source: bounty-targets-data (public HackerOne, Bugcrowd, Intigriti, YesWeHack listings).

National notice (Türkiye Cybersecurity Directorate / USOM)

Official security notices citing this record; remediation advice is on the agency's page.

All national notices →

Technical details

No CVSS vector for this record, so attack conditions can't be derived.

Weakness class (CWE)

—

Attack context

MITRE CAPEC attack patterns and ATT&CK techniques for this weakness class (CWE). A starting point for detection rules and threat hunting.

MITRE has no CAPEC/ATT&CK mapping for this CWE.

Change log

  1. Fix✗ → ✓

For records you follow, these changes also arrive as notifications. →

References

All records