CVE-2026-74274: cxl/region: Fill first free targets[] slot during auto-discovery
Noroxi assessment
Priority: Monitor (action score 0/100)
- The sources we track (CISA KEV, Exploit-DB, Metasploit, Nuclei, GitHub) show no public exploit code or exploitation in the wild.
- Probability of exploitation in the next 30 days: 0.21% (FIRST EPSS).
- Fixed version: Linux Linux 6fde3fcdfec438ba0df26e25a8ac7c3707211799, aa8a76711c15041ec1e42c3a74c15c2df0bd31f6.
Low priority for now. Upgrade to Linux Linux 6fde3fcdfec438ba0df26e25a8ac7c3707211799, aa8a76711c15041ec1e42c3a74c15c2df0bd31f6 or later.
Generated automatically from the record's data: CVSS (NVD and CNA), CISA KEV and SSVC, FIRST EPSS, exploit sources, fixed versions. How we calculate it
Primary sources: NVD · CVE.org · FIRST EPSS
In the Linux kernel, the following vulnerability has been resolved: cxl/region: Fill first free targets[] slot during auto-discovery Any invalid endpoint decoder pointer in the target array of an active region is not allowed by cxl driver. This means cxl driver always assumes the first p->nr_targets entries of the target array in an auto-assembly region are valid. However, there are scenarios that could leave NULL endpoint decoder pointer holes in the target array. 1. When cxl_cancel_auto_attach() removes an endpoint decoder from a target array, the target slot is set to NULL. If the removed endpoint decoder is not the last element in the target array, the target array will contain a NULL hole. 2. When a auto-assembly region removes an assigned endpoint decoder, if the removed endpoint decoder is not the last element in the target array, always remains a NULL hole in the target array. When a NULL pointer hole exists in a region's target array, it introduces two potential problems: 1. Access an endpoint decoder via a NULL pointer. it always trigger calltrace like that. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000008: 0000 [#1] SMP KASAN PTI RIP: 0010:cxl_calc_interleave_pos+0x26/0x810 [cxl_core] Call Trace: <TASK> cxl_region_attach+0xc50/0x2140 [cxl_core] cxl_add_to_region+0x321/0x2330 [cxl_core] discover_region+0x92/0x150 [cxl_port] device_for_each_child+0xf3/0x170 cxl_port_probe+0x150/0x200 [cxl_port] cxl_bus_probe+0x4f/0xa0 [cxl_core] really_probe+0x1c8/0x960 __driver_probe_device+0x323/0x450 driver_probe_device+0x45/0x120 __device_attach_driver+0x15d/0x280 bus_for_each_drv+0x10f/0x190 2. Not having enough valid endpoint decoders attached to an auto-assembly region. if an auto-assembly region is created with lock flag or assigned endpoint decoder with lock flag, which means assigned endpoint decoder will not be reset during detaching, they could re-attach to the auto-assembly region again. But cxl region driver relies on p->nr_targets to verify whether the required number of endpoint decoders has been attached, and NULL endpoint decoder pointers are still counted in that case. To fix above issues, adjust cxl_region_attach_auto() logic to find the first free target slot for endpoint decoder attachment, this ensures NULL holes in the target array are filled, rather than adding new endpoint decoders at the tail of the target array.
- Published
- Aug 15, 2026
- Updated
- Aug 17, 2026
- EPSS
- 0.2% · 12th percentile
- CWE
- —
Report tools
Action score
0
Monitor
Low priority for now.
- CVSS
- 0 / 40 · —
- CISA KEV
- 0 / 30 · Not listed
- EPSS
- 0 / 30 · 0.2%
Get told when this record changes
- Not in KEV: no record of exploitation in the wild
- No public exploit code on record
- A fix has been released
If any of these changes, we'll tell you in the daily email digest.
Running WordPress? Scan your site free with WP Lens
Noroxi analysis
What does it mean in your environment?
The assessment above is generated automatically from the record's data; it doesn't know your environment. Our team verifies on your systems whether this vulnerability is actually exploitable and which mitigation is enough.
We use this product, ask for helpAffected systems
Is your version affected?
Pick the product and type the version you run. It's compared with this record's version ranges in your browser; the version isn't sent anywhere.
—
Versions reported by the vendor
Affected version ranges reported by the assigning authority (Linux). Independent of NVD's CPE analysis and usually ahead of it.
Linux Linux
- 6.19affected
- 2230c4bdc4120417799c74326ade3123da226d54 and later · before 6fde3fcdfec438ba0df26e25a8ac7c3707211799affected · git
- 2230c4bdc4120417799c74326ade3123da226d54 and later · before aa8a76711c15041ec1e42c3a74c15c2df0bd31f6affected · git
- before 6.19not affected · semver
- 7.1.5 and later · up to and including 7.1.*not affected · semver
- 7.2 and laternot affected · original_commit_for_fix
Package-level exposure
OSV and GitHub Advisory data: ecosystem, package and range. SBOM matching uses this table.
| Ecosystem | Package | Affected range | Fix |
|---|---|---|---|
| Debian:14 | linux | before 7.1.5-1 | 7.1.5-1 |
Same product
linux: all recordsOther highest-scoring records for the same primary product.
- CVE-2026-74705udp: fix potential use-after-free in tunnel segmentation40Plan
- CVE-2026-74612veth: fix skb length accounting after XDP frag adjustment40Plan
- CVE-2026-74475vxlan: use neigh_ha_snapshot() in route_shortcircuit()40Plan
Published before and after this one in the same product
- ← EarlierCVE-2026-74266Aug 15, 2026 · net/sched: sch_dualpi2: Do not call qdisc_tree_reduce_backlog during peek before restoring qlen0Monitor
- ← EarlierCVE-2026-74271Aug 15, 2026 · power: supply: core: fix supplied_from allocations0Monitor
- Later →CVE-2026-74275Aug 15, 2026 · cxl/region: Fix out-of-bounds access in cxl_cancel_auto_attach()33Monitor
Remediation
Which version to upgrade to
Fix versions compiled from the vendor, package registries and Microsoft. Verify the vendor's note before upgrading.
| Product / package | Fixed version | Source |
|---|---|---|
| Linux Linux | 6fde3fcdfec438ba0df26e25a8ac7c3707211799 | Vendor (CNA) |
| Linux Linux | aa8a76711c15041ec1e42c3a74c15c2df0bd31f6 | Vendor (CNA) |
| debian:linux | 7.1.5-1 · Debian:14 | Package registry (OSV) |
Exploit status
No known public exploit
No public exploit has been observed yet. That doesn't mean you're safe, only that the bar is a little higher.
Research context
For pentesters and researchers: attack profile, score disagreement, timeline, patch commits, credits, variant and chain candidates, bug bounty scope. All derived from existing data; no exploit code.
Timeline
From publication to today: proof of concept, Metasploit module, CISA KEV and fix record. Dates are as reported by the sources.
No dated events beyond publication.
FIRST EPSS daily score; only changes of 0.01 or more are recorded (step chart).
Patch and commit links
Commit, PR and diff links among the references. A starting point for patch-diffing and variant hunting; fixes, not exploits.
No commit or PR link among the references.
Credits
All researchersFinders, reporters and analysts named in the CNA record. Click a name for that researcher’s other records.
No credits in the CNA record.
Variant candidates
Same product, same weakness class, within 18 months. If the patch missed the root cause, the sibling bug is here.
No nightly-computed relations.
Chain candidates
An authentication bypass and a privilege-requiring bug in the same product, published close together: combined they may become an unauthenticated path.
—
Bug bounty scope
No known public program.
Source: bounty-targets-data (public HackerOne, Bugcrowd, Intigriti, YesWeHack listings).
Technical details
No CVSS vector for this record, so attack conditions can't be derived.
Weakness class (CWE)
—
Attack context
MITRE CAPEC attack patterns and ATT&CK techniques for this weakness class (CWE). A starting point for detection rules and threat hunting.
MITRE has no CAPEC/ATT&CK mapping for this CWE.
Change log
- Fix✗ → ✓
For records you follow, these changes also arrive as notifications. →
References
Show all references (1 more)Show less
Vendor advisories and official records. Exploit/PoC links are deliberately left out.