CVE-2025-21632: x86/fpu: Ensure shadow stack is active before "getting" registers
Noroxi assessment
Priority: Monitor (action score 22/100)
- The sources we track (CISA KEV, Exploit-DB, Metasploit, Nuclei, GitHub) show no public exploit code or exploitation in the wild.
- Probability of exploitation in the next 30 days: 0.20% (FIRST EPSS).
- Someone with local access to the system can trigger it. A low-privileged account is enough. No user action is required. No special conditions are required; it is repeatable.
- Fixed version: Linux Linux 0a3a872214188e4268d31581ed0cd44508e038cf, 6bfe1fc22f462bec87422cdcbec4d7a2f43ff01d, a9d9c33132d49329ada647e4514d210d15e31d81.
Low priority for now. Upgrade to Linux Linux 0a3a872214188e4268d31581ed0cd44508e038cf, 6bfe1fc22f462bec87422cdcbec4d7a2f43ff01d, a9d9c33132d49329ada647e4514d210d15e31d81 or later.
Generated automatically from the record's data: CVSS (NVD and CNA), CISA KEV and SSVC, FIRST EPSS, exploit sources, fixed versions. How we calculate it
Primary sources: NVD · CVE.org · FIRST EPSS
In the Linux kernel, the following vulnerability has been resolved: x86/fpu: Ensure shadow stack is active before "getting" registers The x86 shadow stack support has its own set of registers. Those registers are XSAVE-managed, but they are "supervisor state components" which means that userspace can not touch them with XSAVE/XRSTOR. It also means that they are not accessible from the existing ptrace ABI for XSAVE state. Thus, there is a new ptrace get/set interface for it. The regset code that ptrace uses provides an ->active() handler in addition to the get/set ones. For shadow stack this ->active() handler verifies that shadow stack is enabled via the ARCH_SHSTK_SHSTK bit in the thread struct. The ->active() handler is checked from some call sites of the regset get/set handlers, but not the ptrace ones. This was not understood when shadow stack support was put in place. As a result, both the set/get handlers can be called with XFEATURE_CET_USER in its init state, which would cause get_xsave_addr() to return NULL and trigger a WARN_ON(). The ssp_set() handler luckily has an ssp_active() check to avoid surprising the kernel with shadow stack behavior when the kernel is not ready for it (ARCH_SHSTK_SHSTK==0). That check just happened to avoid the warning. But the ->get() side wasn't so lucky. It can be called with shadow stacks disabled, triggering the warning in practice, as reported by Christina Schimpe: WARNING: CPU: 5 PID: 1773 at arch/x86/kernel/fpu/regset.c:198 ssp_get+0x89/0xa0 [...] Call Trace: <TASK> ? show_regs+0x6e/0x80 ? ssp_get+0x89/0xa0 ? __warn+0x91/0x150 ? ssp_get+0x89/0xa0 ? report_bug+0x19d/0x1b0 ? handle_bug+0x46/0x80 ? exc_invalid_op+0x1d/0x80 ? asm_exc_invalid_op+0x1f/0x30 ? __pfx_ssp_get+0x10/0x10 ? ssp_get+0x89/0xa0 ? ssp_get+0x52/0xa0 __regset_get+0xad/0xf0 copy_regset_to_user+0x52/0xc0 ptrace_regset+0x119/0x140 ptrace_request+0x13c/0x850 ? wait_task_inactive+0x142/0x1d0 ? do_syscall_64+0x6d/0x90 arch_ptrace+0x102/0x300 [...] Ensure that shadow stacks are active in a thread before looking them up in the XSAVE buffer. Since ARCH_SHSTK_SHSTK and user_ssp[SHSTK_EN] are set at the same time, the active check ensures that there will be something to find in the XSAVE buffer. [ dhansen: changelog/subject tweaks ]
- Published
- Jan 19, 2025
- Updated
- Nov 5, 2026
- EPSS
- 0.2% · 10th percentile
- CWE
- CWE-476
Report tools
Action score
22
Monitor
Low priority for now.
- CVSS
- 22 / 40 · 5.5 / 10
- CISA KEV
- 0 / 30 · Not listed
- EPSS
- 0 / 30 · 0.2%
CISA SSVC decision
- Exploitation
- none
- Automatable
- no
- Technical impact
- partial
Vulnrichment: CISA's decision-tree inputs.
Get told when this record changes
- Not in KEV: no record of exploitation in the wild
- No public exploit code on record
- A fix has been released
If any of these changes, we'll tell you in the daily email digest.
Running WordPress? Scan your site free with WP Lens
Noroxi analysis
What does it mean in your environment?
The assessment above is generated automatically from the record's data; it doesn't know your environment. Our team verifies on your systems whether this vulnerability is actually exploitable and which mitigation is enough.
We use this product, ask for helpAffected systems
Is your version affected?
Pick the product and type the version you run. It's compared with this record's version ranges in your browser; the version isn't sent anywhere.
| Vendor | Product | CPE |
|---|---|---|
| linux | linux kernel | cpe:2.3:o:linux:linux_kernel |
Affected versions
NVD version ranges (for catalog products). Add the product to your stack with a version and matching uses these.
- linux linux kernel6.6 and later · before 6.6.72
- linux linux kernel6.7 and later · before 6.12.10
- linux linux kernel6.13
Versions reported by the vendor
Affected version ranges reported by the assigning authority (Linux). Independent of NVD's CPE analysis and usually ahead of it.
Linux Linux
- 6.6affected
- 2fab02b25ae7cf5f714ab456b03d9a3fe5ae98c9 and later · before 0a3a872214188e4268d31581ed0cd44508e038cfaffected · git
- 2fab02b25ae7cf5f714ab456b03d9a3fe5ae98c9 and later · before 6bfe1fc22f462bec87422cdcbec4d7a2f43ff01daffected · git
- 2fab02b25ae7cf5f714ab456b03d9a3fe5ae98c9 and later · before a9d9c33132d49329ada647e4514d210d15e31d81affected · git
- before 6.6not affected · semver
- 6.6.72 and later · up to and including 6.6.*not affected · semver
- 6.12.10 and later · up to and including 6.12.*not affected · semver
- 6.13 and laternot affected · original_commit_for_fix
Package-level exposure
OSV and GitHub Advisory data: ecosystem, package and range. SBOM matching uses this table.
| Ecosystem | Package | Affected range | Fix |
|---|---|---|---|
| Debian:13 | linux | before 6.12.10-1 | 6.12.10-1 |
Same product
linux: all recordsOther highest-scoring records for the same primary product.
- CVE-2026-31431crypto: algif_aead - Revert to operating out-of-placeKEV90Now
- CVE-2022-0847A flaw was found in the way the "flags" member of the new pipe buffer structure was lacking proper initialization in copy_page_to_iter_pipe KEV89Now
- CVE-2021-22555Heap Out-Of-Bounds Write in Netfilter IP6T_SO_SET_REPLACEKEV85Now
Published before and after this one in the same product
- ← EarlierCVE-2024-57927Jan 19, 2025 · nfs: Fix oops in nfs_netfs_init_request() when copying to cache22Monitor
- ← EarlierCVE-2024-57928Jan 19, 2025 · netfs: Fix enomem handling in buffered reads28Monitor
- Later →CVE-2025-21635Jan 19, 2025 · rds: sysctl: rds_tcp_{rcv,snd}buf: avoid using current->nsproxy22Monitor
Remediation
Which version to upgrade to
Fix versions compiled from the vendor, package registries and Microsoft. Verify the vendor's note before upgrading.
| Product / package | Fixed version | Source |
|---|---|---|
| Linux Linux | 0a3a872214188e4268d31581ed0cd44508e038cf | Vendor (CNA) |
| Linux Linux | 6bfe1fc22f462bec87422cdcbec4d7a2f43ff01d | Vendor (CNA) |
| Linux Linux | a9d9c33132d49329ada647e4514d210d15e31d81 | Vendor (CNA) |
| debian:linux | 6.12.10-1 · Debian:13 | Package registry (OSV) |
Exploit status
No known public exploit
No public exploit has been observed yet. That doesn't mean you're safe, only that the bar is a little higher.
Research context
For pentesters and researchers: attack profile, score disagreement, timeline, patch commits, credits, variant and chain candidates, bug bounty scope. All derived from existing data; no exploit code.
Timeline
From publication to today: proof of concept, Metasploit module, CISA KEV and fix record. Dates are as reported by the sources.
No dated events beyond publication.
No history yet (it accumulates with the daily EPSS job).
Patch and commit links
Commit, PR and diff links among the references. A starting point for patch-diffing and variant hunting; fixes, not exploits.
No commit or PR link among the references.
Credits
All researchersFinders, reporters and analysts named in the CNA record. Click a name for that researcher’s other records.
No credits in the CNA record.
Variant candidates
Same product, same weakness class, within 18 months. If the patch missed the root cause, the sibling bug is here.
No nightly-computed relations.
Chain candidates
An authentication bypass and a privilege-requiring bug in the same product, published close together: combined they may become an unauthenticated path.
—
Bug bounty scope
No known public program.
Source: bounty-targets-data (public HackerOne, Bugcrowd, Intigriti, YesWeHack listings).
Technical details
Attack conditions
- Someone with local access to the system can trigger it.
- A low-privileged account is enough.
- No user action is required.
- No special conditions are required; it is repeatable.
If successful
- Confidentiality
- none
- Integrity
- none
- Availability
- high · the service can be disrupted
- Attack vector
- Local
- Attack complexity
- Low
- Privileges required
- Low
- User interaction
- None
- Scope
- Unchanged
- Confidentiality impact
- None
- Integrity impact
- None
- Availability impact
- High
Weakness class (CWE)
CWE-476 · NULL Pointer DereferenceCVSS vector
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
nvd-primary
Attack context
MITRE CAPEC attack patterns and ATT&CK techniques for this weakness class (CWE). A starting point for detection rules and threat hunting.
MITRE has no CAPEC/ATT&CK mapping for this CWE.
Change log
- SSVC exploitation— → none
- Fix✗ → ✓
For records you follow, these changes also arrive as notifications. →
References
Show all references (2 more)Show less
Vendor advisories and official records. Exploit/PoC links are deliberately left out.