Skip to content
Noroxi
NVD / CVE Program· CNA mitre

CVE-2024-22813: An issue in Tormach xsTECH CNC Router, PathPilot Controller v2.9.6 allows attackers to overwrite the hardcoded IP address in the device memo

Noroxi assessment

Priority: Monitor (action score 17/100)

  • The sources we track (CISA KEV, Exploit-DB, Metasploit, Nuclei, GitHub) show no public exploit code or exploitation in the wild.
  • Probability of exploitation in the next 30 days: 0.38% (FIRST EPSS).
  • Anyone who can reach it over the internet can trigger it. Administrator privileges are required. No user action is required. Special conditions such as timing or configuration are required.
  • According to CISA the attack is automatable: targets can be found by mass scanning.
  • According to the record, no fixed version is available yet.

Low priority for now. Update when a fix is released; follow the vendor's advisory.

Generated automatically from the record's data: CVSS (NVD and CNA), CISA KEV and SSVC, FIRST EPSS, exploit sources, fixed versions. How we calculate it

Primary sources: NVD · CVE.org · FIRST EPSS

An issue in Tormach xsTECH CNC Router, PathPilot Controller v2.9.6 allows attackers to overwrite the hardcoded IP address in the device memory, disrupting network connectivity between the router and the controller.

MediumCVSS 4.4 · v3.1—No exploit No fix recorded
Published
Apr 22, 2024
Updated
Jun 17, 2026
EPSS
0.3% · 32th percentile

Report tools

JSON

Action score

17

Monitor

Low priority for now.

CVSS
17 / 40 · 4.4 / 10
CISA KEV
0 / 30 · Not listed
EPSS
0 / 30 · 0.3%

CISA SSVC decision

Exploitation
none
Automatable
yes
Technical impact
partial

Vulnrichment: CISA's decision-tree inputs.

Get told when this record changes

  • Not in KEV: no record of exploitation in the wild
  • No public exploit code on record
  • No fixed version yet

If any of these changes, we'll tell you in the daily email digest.

Follow CVE-2024-22813

When you'll hear from us

  • when it enters CISA KEV
  • when exploit code appears or is weaponized
  • when the record is updated (including a fixed version)
  • when EPSS rises 20 points in a week

One daily email digest (06:00 UTC); connect a webhook for KEV listings and weaponized exploits instantly.

Your free account also gets you

Running WordPress? Scan your site free with WP Lens

  • Stack alerts: add the products and versions you run, get the new CVEs that affect them
  • Uptime monitoring: 1 site, instant email when it goes down
  • Add your domain: subdomains and takeover risk scanned every week (1 domain)
  • 10 scans an hour on the security tools (3 a day without an account), an API key and MCP
  • All your scans in one panel: findings, what changed in the last scan, a report per domain or per client (PDF, share link)
All free tools

Sign up with email · Have an account? Sign in

Free account, no card. Unfollow any time.

Running WordPress? Scan your site free with WP Lens

Is your version affected? Check it

Noroxi analysis

What does it mean in your environment?

The assessment above is generated automatically from the record's data; it doesn't know your environment. Our team verifies on your systems whether this vulnerability is actually exploitable and which mitigation is enough.

We use this product, ask for help

Affected systems

Is your version affected?

Pick the product and type the version you run. It's compared with this record's version ranges in your browser; the version isn't sent anywhere.

VendorProduct
tormachpathpilot controller
tormachxstech cnc router

Affected versions

NVD version ranges (for catalog products). Add the product to your stack with a version and matching uses these.

  • tormach pathpilot controller2.9.6

Other highest-scoring records for the same primary product.

  • CVE-2024-22811An issue in Tormach xsTECH CNC Router, PathPilot Controller v2.9.6 allows attackers to cause a Denial of Service (DoS) by disrupting the com
    32Monitor
  • CVE-2024-22808An issue in Tormach xsTECH CNC Router, PathPilot Controller v2.9.6 allows attackers to cause a Denial of Service (DoS) by disrupting the com
    30Monitor
  • CVE-2024-22809Incorrect access control in Tormach xsTECH CNC Router, PathPilot Controller v2.9.6 allows attackers to access the G code's shared folder and
    26Monitor

Published before and after this one in the same product

  • ← EarlierCVE-2024-22807Apr 22, 2024 · An issue in Tormach xsTECH CNC Router, PathPilot Controller v2.9.6 allows attackers to erase a critical sector of the flash memory, causing
    26Monitor
  • Later →CVE-2024-22815Apr 22, 2024 · An issue in the communication protocol of Tormach xsTECH CNC Router, PathPilot Controller v2.9.6 allows attackers to cause a Denial of Servi
    21Monitor

Remediation

Which version to upgrade to

Fix versions compiled from the vendor, package registries and Microsoft. Verify the vendor's note before upgrading.

No fix version is recorded for this entry. Check the references for vendor advisories.

Exploit status

No known public exploit

No public exploit has been observed yet. That doesn't mean you're safe, only that the bar is a little higher.

Research context

For pentesters and researchers: attack profile, score disagreement, timeline, patch commits, credits, variant and chain candidates, bug bounty scope. All derived from existing data; no exploit code.

Timeline

From publication to today: proof of concept, Metasploit module, CISA KEV and fix record. Dates are as reported by the sources.

No dated events beyond publication.

No history yet (it accumulates with the daily EPSS job).

Patch and commit links

Commit, PR and diff links among the references. A starting point for patch-diffing and variant hunting; fixes, not exploits.

No commit or PR link among the references.

Finders, reporters and analysts named in the CNA record. Click a name for that researcher’s other records.

No credits in the CNA record.

Variant candidates

Same product, same weakness class, within 18 months. If the patch missed the root cause, the sibling bug is here.

No nightly-computed relations.

Chain candidates

An authentication bypass and a privilege-requiring bug in the same product, published close together: combined they may become an unauthenticated path.

—

Bug bounty scope

No known public program.

Source: bounty-targets-data (public HackerOne, Bugcrowd, Intigriti, YesWeHack listings).

Technical details

Attack conditions

  • Anyone who can reach it over the internet can trigger it.
  • Administrator privileges are required.
  • No user action is required.
  • Special conditions such as timing or configuration are required.

If successful

Confidentiality
none
Integrity
none
Availability
high · the service can be disrupted
Attack vector
Network
Attack complexity
High
Privileges required
High
User interaction
None
Scope
Unchanged
Confidentiality impact
None
Integrity impact
None
Availability impact
High

CVSS vector

CVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:U/C:N/I:N/A:H

nvd-secondary

Root cause

For convenience in support or manufacturing, an account that is identical on every device is embedded in the software. Credentials learned from one device work on all of them.

A representative example of this vulnerability class. Not the vendor's source code; it shows the faulty pattern and its fix.

Vulnerable

ts
const SUPPORT_USER = "support";const SUPPORT_PASS = "hardcoded-password";

Fixed

ts
const creds = await provisioning.deviceCredentials(deviceId);if (creds.mustRotate) await forcePasswordChange(deviceId);

Attack context

MITRE CAPEC attack patterns and ATT&CK techniques for this weakness class (CWE). A starting point for detection rules and threat hunting.

Change log

No changes recorded on tracked fields yet. Score, KEV, exploit maturity and fix status changes appear here.

References

Vendor advisories and official records. Exploit/PoC links are deliberately left out.

All records