Skip to content
Noroxi
NVD / CVE Program· CNA zephyr

CVE-2026-90834: UART wide-data syscall verifiers check the 8-bit driver op, allowing a user-mode thread to trigger a NULL function-pointer call in kernel mode

Noroxi assessment

Priority: Monitor (action score 22/100)

  • The sources we track (CISA KEV, Exploit-DB, Metasploit, Nuclei, GitHub) show no public exploit code or exploitation in the wild.
  • Someone with local access to the system can trigger it. A low-privileged account is enough. No user action is required. No special conditions are required; it is repeatable.
  • Fixed version: zephyrproject zephyr 4.3.2, 4.5.0.

Low priority for now. Upgrade to zephyrproject zephyr 4.3.2, 4.5.0 or later.

Generated automatically from the record's data: CVSS (NVD and CNA), CISA KEV and SSVC, FIRST EPSS, exploit sources, fixed versions. How we calculate it

Primary sources: NVD · CVE.org

The user-mode syscall verifiers for the 16-bit ("wide data") UART API in drivers/serial/uart_handlers.c validated the wrong driver operation. z_vrfy_uart_poll_out_u16(), z_vrfy_uart_tx_u16() and z_vrfy_uart_rx_enable_u16() each ran K_SYSCALL_DRIVER_UART() against the 8-bit op (poll_out, tx, rx_enable) rather than the 16-bit op that the corresponding implementation dereferences (poll_out_u16, tx_u16, rx_enable_u16). z_impl_uart_poll_out_u16(), z_impl_uart_tx_u16() and z_impl_uart_rx_enable_u16() in include/zephyr/drivers/uart/uart_internal.h call their op unconditionally, with no NULL guard of their own, because the verifier is supposed to have established that the op exists. CONFIG_UART_WIDE_DATA is an application-selectable option that no driver selects, and only a handful of the serial drivers in the tree implement any _u16 operation; every other driver leaves those struct uart_driver_api members NULL while still providing the 8-bit ops the old check inspected. In a build with CONFIG_USERSPACE and CONFIG_UART_WIDE_DATA (plus CONFIG_UART_ASYNC_API for the uart_tx_u16() and uart_rx_enable_u16() variants), an unprivileged user-mode thread that legitimately holds access to such a UART device object can invoke the _u16 syscall: the object, permission and op checks all pass, and the kernel-side implementation then performs an indirect call through a NULL function pointer while running at supervisor privilege. The result is a CPU exception taken in kernel context instead of the intended K_OOPS or -ENOSYS return. With the default k_sys_fatal_error_handler() this halts the system (or warm-reboots it under CONFIG_RESET_ON_FATAL_ERROR), so a thread confined by the userspace sandbox can deny service to the whole device — a capability the user-mode privilege boundary is specifically meant to withhold. The call target is a fixed NULL, so there is no attacker-controlled code execution and no memory disclosure; the separate K_SYSCALL_MEMORY_ARRAY_READ()/K_SYSCALL_MEMORY_ARRAY_WRITE() bounds checks on the caller's buffer were and remain correct. The fix points each verifier at the matching _u16 op, using a plain K_SYSCALL_OBJ() object check where the op does not exist or where the implementation already tests it for NULL.

MediumCVSS 5.5 · v3.1—No exploit Fix available
Published
Nov 10, 2026
Updated
Nov 10, 2026
EPSS
—

Report tools

JSON

Action score

22

Monitor

Low priority for now.

CVSS
22 / 40 · 5.5 / 10
CISA KEV
0 / 30 · Not listed
EPSS
0 / 30 · —

CNA vs NVD score

NVD
—
CNA · zephyr
5.5
NVD has not scored this yet; the score shown is the CNA’s.

The score given by the assigning authority versus NVD’s independent score. A gap means the severity is contested.

Get told when this record changes

  • Not in KEV: no record of exploitation in the wild
  • No public exploit code on record
  • A fix has been released

If any of these changes, we'll tell you in the daily email digest.

Follow CVE-2026-90834

When you'll hear from us

  • when it enters CISA KEV
  • when exploit code appears or is weaponized
  • when the record is updated (including a fixed version)
  • when EPSS rises 20 points in a week

One daily email digest (06:00 UTC); connect a webhook for KEV listings and weaponized exploits instantly.

Your free account also gets you

  • Stack alerts: add the products and versions you run, get the new CVEs that affect them
  • Uptime monitoring: 1 site, instant email when it goes down
  • Add your domain: subdomains and takeover risk scanned every week (1 domain)
  • 10 scans an hour on the security tools (3 a day without an account), an API key and MCP
  • All your scans in one panel: findings, what changed in the last scan, a report per domain or per client (PDF, share link)
All free tools

Sign up with email · Have an account? Sign in

Free account, no card. Unfollow any time.

Is your version affected? Check it

Noroxi analysis

What does it mean in your environment?

The assessment above is generated automatically from the record's data; it doesn't know your environment. Our team verifies on your systems whether this vulnerability is actually exploitable and which mitigation is enough.

We use this product, ask for help

Affected systems

Is your version affected?

Pick the product and type the version you run. It's compared with this record's version ranges in your browser; the version isn't sent anywhere.

—

Versions reported by the vendor

Affected version ranges reported by the assigning authority (zephyr). Independent of NVD's CPE analysis and usually ahead of it.

  • zephyrproject zephyr

    • 3.0.0 and later · before 4.3.2affected · semver
    • 4.4.0 and later · before 4.5.0affected · semver

Other highest-scoring records for the same primary product.

  • CVE-2023-4260Potential off-by-one buffer overflow vulnerability in the Zephyr FS subsystem
    40Plan
  • CVE-2021-3625Buffer overflow in Zephyr USB DFU DNLOAD
    40Plan
  • CVE-2020-10071Insufficient publish message length validation in MQTT
    40Plan

Published before and after this one in the same product

  • ← EarlierCVE-2026-87042Nov 10, 2026 · Zephyr PTP: unvalidated Delay_Resp message interval lets an on-link peer wedge the PTP thread and flood the network
    26Monitor
  • ← EarlierCVE-2026-90832Nov 10, 2026 · Out-of-bounds read in Bluetooth Host periodic advertising report reassembly due to unvalidated report length
    17Monitor
  • ← EarlierCVE-2026-90833Nov 10, 2026 · Signed offset bypasses bounds check in simulated EEPROM driver, allowing out-of-bounds kernel memory read and write from user mode
    31Monitor

Remediation

Which version to upgrade to

Fix versions compiled from the vendor, package registries and Microsoft. Verify the vendor's note before upgrading.

Product / packageFixed versionSource
zephyrproject zephyr4.3.2Vendor (CNA)
zephyrproject zephyr4.5.0Vendor (CNA)

Exploit status

No known public exploit

No public exploit has been observed yet. That doesn't mean you're safe, only that the bar is a little higher.

Research context

For pentesters and researchers: attack profile, score disagreement, timeline, patch commits, credits, variant and chain candidates, bug bounty scope. All derived from existing data; no exploit code.

Timeline

From publication to today: proof of concept, Metasploit module, CISA KEV and fix record. Dates are as reported by the sources.

  1. Published
  2. Fix recordedsame day
  3. TodayNov 11, 2026same day

No history yet (it accumulates with the daily EPSS job).

Patch and commit links

Commit, PR and diff links among the references. A starting point for patch-diffing and variant hunting; fixes, not exploits.

Finders, reporters and analysts named in the CNA record. Click a name for that researcher’s other records.

No credits in the CNA record.

Variant candidates

Same product, same weakness class, within 18 months. If the patch missed the root cause, the sibling bug is here.

  • CVE-2026-10678112 days apartNULL-pointer / out-of-bounds write in Zephyr MCTP I2C+GPIO target binding driven by an unauthenticated I2C controller
    32Monitor
  • CVE-2026-870454 days apartNULL pointer dereference in the Zephyr HTTP/2 server when a header block is completed by a CONTINUATION frame
    30Monitor
  • CVE-2026-1589158 days apartNULL pointer dereference in Zephyr MQTT-SN client when removing a non-responsive gateway
    30Monitor
  • CVE-2026-1181092 days apartNULL-pointer dereference in UpdateHub OTA agent on empty inner metadata array (remote DoS)
    30Monitor
  • CVE-2026-7997620 days apartNULL pointer dereference in the MCTP I2C+GPIO target binding triggerable by a peer I2C controller
    28Monitor
  • CVE-2026-8238915 days apartBluetooth Classic HFP AG wipes an object still linked in the SDP request list on connect failure, causing a NULL dereference
    26Monitor

Chain candidates

An authentication bypass and a privilege-requiring bug in the same product, published close together: combined they may become an unauthenticated path.

—

Bug bounty scope

No known public program.

Source: bounty-targets-data (public HackerOne, Bugcrowd, Intigriti, YesWeHack listings).

Technical details

Attack conditions

  • Someone with local access to the system can trigger it.
  • A low-privileged account is enough.
  • No user action is required.
  • No special conditions are required; it is repeatable.

If successful

Confidentiality
none
Integrity
none
Availability
high · the service can be disrupted
Attack vector
Local
Attack complexity
Low
Privileges required
Low
User interaction
None
Scope
Unchanged
Confidentiality impact
None
Integrity impact
None
Availability impact
High

CVSS vector

CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

nvd-secondary

Attack context

MITRE CAPEC attack patterns and ATT&CK techniques for this weakness class (CWE). A starting point for detection rules and threat hunting.

MITRE has no CAPEC/ATT&CK mapping for this CWE.

Change log

  1. Fix✗ → ✓
  2. Exploit maturity— → none

For records you follow, these changes also arrive as notifications. →

References

Show all references (1 more)

Vendor advisories and official records. Exploit/PoC links are deliberately left out.

All records