CVE-2026-4827: Insufficient Entropy vulnerability on Multiple Products
Noroxi assessment
Priority: Monitor (action score 34/100)
- The sources we track (CISA KEV, Exploit-DB, Metasploit, Nuclei, GitHub) show no public exploit code or exploitation in the wild.
- Probability of exploitation in the next 30 days: 0.31% (FIRST EPSS).
- Anyone who can reach it over the internet can trigger it. No account or password is required. No special conditions are required; it is repeatable.
- According to CISA the attack is automatable: targets can be found by mass scanning.
- According to the record, no fixed version is available yet.
Low priority for now. Update when a fix is released; follow the vendor's advisory.
Generated automatically from the record's data: CVSS (NVD and CNA), CISA KEV and SSVC, FIRST EPSS, exploit sources, fixed versions. How we calculate it
Primary sources: NVD · CVE.org · FIRST EPSS
CWE‑331: Insufficient Entropy vulnerability exists that could lead to unauthorized access when an attacker on the network can exploit weaknesses in session‑management protections.
- Published
- May 12, 2026
- Updated
- Oct 26, 2026
- EPSS
- 0.3% · 24th percentile
- CWE
- CWE-331
Report tools
Action score
34
Monitor
Low priority for now.
- CVSS
- 34 / 40 · 8.7 / 10
- CISA KEV
- 0 / 30 · Not listed
- EPSS
- 0 / 30 · 0.3%
CISA SSVC decision
- Exploitation
- none
- Automatable
- yes
- Technical impact
- total
Vulnrichment: CISA's decision-tree inputs.
CNA vs NVD score
- NVD
- —
- CNA · schneider
- 8.7
- NVD has not scored this yet; the score shown is the CNA’s.
CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:P/VC:H/VI:H/VA:L/SC:N/SI:N/SA:N
The score given by the assigning authority versus NVD’s independent score. A gap means the severity is contested.
Get told when this record changes
- Not in KEV: no record of exploitation in the wild
- No public exploit code on record
- No fixed version yet
If any of these changes, we'll tell you in the daily email digest.
Running WordPress? Scan your site free with WP Lens
Noroxi analysis
What does it mean in your environment?
The assessment above is generated automatically from the record's data; it doesn't know your environment. Our team verifies on your systems whether this vulnerability is actually exploitable and which mitigation is enough.
We use this product, ask for helpAffected systems
Is your version affected?
Pick the product and type the version you run. It's compared with this record's version ranges in your browser; the version isn't sent anywhere.
—
Versions reported by the vendor
Affected version ranges reported by the assigning authority (schneider). Independent of NVD's CPE analysis and usually ahead of it.
Schneider Electric Easergy C5
- Version 1.1.17 and prioraffected
Schneider Electric Easergy MiCOM C264
- Versions D6.x, Versions D7.33 and prioraffected
Schneider Electric Easergy MiCOM P30
- P139 version prior to P139.678.700, P437 version prior to P437.678.700, P439 version prior to P439.678.700, P532 version prior to P532.678.700, P539 version prior to P539.678.700, P631 version prior to P631.678.700, P632 version prior to P632.678.700, P633 version prior to P633.678.700, P634 version prior to P634.678.700, P633 version P633.680.700 only, P634 version P634.680.700 only, P138 version prior to P138.677.700 … (+4)affected
Schneider Electric Easergy MiCOM P40
- Series model numbers with Protocol Option bit as G, H or L and all firmware versionsaffected
Schneider Electric EasyLogic T150 (formerly Saitel DR)
- Version 11.06.30 and prioraffected
Schneider Electric EcoStruxure™ Power Automation System Gateway (EPAS-GTW)
- Version 6.4.616.200.100 and prioraffected
Schneider Electric EcoStruxure™ Power Automation System User Interface (EPAS-UI)
- Version 3.0.3 and prioraffected
Schneider Electric EcoStruxure™ Power Operation
- Version 2022 CU6 and prior, Version 2024 CU2 and prioraffected
Schneider Electric iPMFLS
- Version 64.2025.0.13 and prioraffected
Schneider Electric PowerLogic™ P5 Protection Relay
- V02.502.103 and prioraffected
Schneider Electric PowerLogic™ P7 Protection and Control Platform
- V02.002.002 and prioraffected
Schneider Electric PowerLogic™ T300
- Version 2.9.4 and prioraffected
Remediation
Which version to upgrade to
Fix versions compiled from the vendor, package registries and Microsoft. Verify the vendor's note before upgrading.
No fix version is recorded for this entry. Check the references for vendor advisories.
Exploit status
No known public exploit
No public exploit has been observed yet. That doesn't mean you're safe, only that the bar is a little higher.
Research context
For pentesters and researchers: attack profile, score disagreement, timeline, patch commits, credits, variant and chain candidates, bug bounty scope. All derived from existing data; no exploit code.
Timeline
From publication to today: proof of concept, Metasploit module, CISA KEV and fix record. Dates are as reported by the sources.
No dated events beyond publication.
No history yet (it accumulates with the daily EPSS job).
Patch and commit links
Commit, PR and diff links among the references. A starting point for patch-diffing and variant hunting; fixes, not exploits.
No commit or PR link among the references.
Credits
All researchersFinders, reporters and analysts named in the CNA record. Click a name for that researcher’s other records.
No credits in the CNA record.
Variant candidates
Same product, same weakness class, within 18 months. If the patch missed the root cause, the sibling bug is here.
No nightly-computed relations.
Chain candidates
An authentication bypass and a privilege-requiring bug in the same product, published close together: combined they may become an unauthenticated path.
—
Bug bounty scope
No known public program.
Source: bounty-targets-data (public HackerOne, Bugcrowd, Intigriti, YesWeHack listings).
Technical details
Attack conditions
- Anyone who can reach it over the internet can trigger it.
- No account or password is required.
- No special conditions are required; it is repeatable.
If successful
- Confidentiality
- Integrity
- Availability
- Attack vector
- Network
- Attack complexity
- Low
- Privileges required
- None
- User interaction
- P
- Scope
- X
Weakness class (CWE)
CWE-331 · Insufficient EntropyCVSS vector
CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:P/VC:H/VI:H/VA:L/SC:N/SI:N/SA:N/E:X/CR:X/IR:X/AR:X/MAV:X/MAC:X/MAT:X/MPR:X/MUI:X/MVC:X/MVI:X/MVA:X/MSC:X/MSI:X/MSA:X/S:X/AU:X/R:X/V:X/RE:X/U:X
nvd-secondary
Attack context
MITRE CAPEC attack patterns and ATT&CK techniques for this weakness class (CWE). A starting point for detection rules and threat hunting.
Attack patterns (CAPEC)
ATT&CK techniques
—
Change log
No changes recorded on tracked fields yet. Score, KEV, exploit maturity and fix status changes appear here.
References
Vendor advisories and official records. Exploit/PoC links are deliberately left out.