Skip to content
Noroxi
CVE.org (no NVD analysis yet)· CNA zephyr

CVE-2026-19676: PECI transfer syscall verifier does not validate embedded user buffer pointers, allowing arbitrary kernel memory read/write from user mode

Noroxi assessment

Priority: Monitor (action score 31/100)

  • The sources we track (CISA KEV, Exploit-DB, Metasploit, Nuclei, GitHub) show no public exploit code or exploitation in the wild.
  • Probability of exploitation in the next 30 days: 0.19% (FIRST EPSS).
  • Someone with local access to the system can trigger it. A low-privileged account is enough. No user action is required. No special conditions are required; it is repeatable.
  • Fixed version: zephyrproject zephyr 4.3.2, 4.5.0.

Low priority for now. Upgrade to zephyrproject zephyr 4.3.2, 4.5.0 or later.

Generated automatically from the record's data: CVSS (NVD and CNA), CISA KEV and SSVC, FIRST EPSS, exploit sources, fixed versions. How we calculate it

Primary sources: NVD · CVE.org · FIRST EPSS

The user-mode verifier for the peci_transfer() system call, z_vrfy_peci_transfer() in drivers/peci/peci_handlers.c, checked only the device object permission and copied the caller-supplied struct peci_msg with k_usermode_from_copy(). That copy validates the outer structure only; the buf pointers and len values inside the embedded struct peci_buf members tx_buffer and rx_buffer remained fully caller-controlled and were passed unchecked to the driver. Every in-tree PECI driver dereferences those pointers in supervisor mode: peci_npcx_transfer() in drivers/peci/peci_npcx.c and peci_it8xxx2_transfer() in drivers/peci/peci_ite_it8xxx2.c copy hardware bytes into rx_buffer.buf[i] and read command bytes out of tx_buffer.buf[i], and peci_xec_read()/peci_xec_write() in drivers/peci/peci_mchp_xec.c do the same with no bound on rx_buffer.len at all. A user-mode thread that has been granted the PECI device object — the normal way an application exposes a device under CONFIG_USERSPACE — could therefore point rx_buffer.buf at kernel data structures and have the driver write hardware-supplied bytes there, or point tx_buffer.buf at kernel memory and have its contents pushed onto the PECI/eSPI out-of-band bus. The impact is a full user-mode-to-kernel escape: an arbitrary kernel write primitive (integrity and, through it, code execution at supervisor privilege), an arbitrary kernel read disclosed to a PECI bus observer, and a trivially reachable supervisor-mode fault if an unmapped address is supplied. Exploitation requires CONFIG_USERSPACE=y, one of the PECI drivers enabled (CONFIG_PECI_NPCX, CONFIG_PECI_XEC or CONFIG_PECI_ITE_IT8XXX2), and local code execution in a user-mode thread holding the PECI device. The fix adds K_SYSCALL_MEMORY_READ() and K_SYSCALL_MEMORY_WRITE() checks over the two embedded buffers, with a size_add_overflow() guard on the frame-check-sequence byte accounted for in the RX length.

HighCVSS 7.8 · v3.1—No exploit Fix available
Published
Oct 21, 2026
Updated
Nov 4, 2026
EPSS
0.1% · 9th percentile

Report tools

JSON

Action score

31

Monitor

Low priority for now.

CVSS
31 / 40 · 7.8 / 10
CISA KEV
0 / 30 · Not listed
EPSS
0 / 30 · 0.1%

CISA SSVC decision

Exploitation
none
Automatable
no
Technical impact
total

Vulnrichment: CISA's decision-tree inputs.

CNA vs NVD score

NVD
—
CNA · zephyr
7.8
NVD has not scored this yet; the score shown is the CNA’s.

The score given by the assigning authority versus NVD’s independent score. A gap means the severity is contested.

Get told when this record changes

  • Not in KEV: no record of exploitation in the wild
  • No public exploit code on record
  • A fix has been released

If any of these changes, we'll tell you in the daily email digest.

Follow CVE-2026-19676

When you'll hear from us

  • when it enters CISA KEV
  • when exploit code appears or is weaponized
  • when the record is updated (including a fixed version)
  • when EPSS rises 20 points in a week

One daily email digest (06:00 UTC); connect a webhook for KEV listings and weaponized exploits instantly.

Your free account also gets you

Running WordPress? Scan your site free with WP Lens

  • Stack alerts: add the products and versions you run, get the new CVEs that affect them
  • Uptime monitoring: 1 site, instant email when it goes down
  • Add your domain: subdomains and takeover risk scanned every week (1 domain)
  • 10 scans an hour on the security tools (3 a day without an account), an API key and MCP
  • All your scans in one panel: findings, what changed in the last scan, a report per domain or per client (PDF, share link)
All free tools

Sign up with email · Have an account? Sign in

Free account, no card. Unfollow any time.

Don't want an account? Get "Exploited this week" by email every MondayDon't want an account? RSS feed for zephyrproject records

Running WordPress? Scan your site free with WP Lens

Is your version affected? Check it

Noroxi analysis

What does it mean in your environment?

The assessment above is generated automatically from the record's data; it doesn't know your environment. Our team verifies on your systems whether this vulnerability is actually exploitable and which mitigation is enough.

We use this product, ask for help

Affected systems

Is your version affected?

Pick the product and type the version you run. It's compared with this record's version ranges in your browser; the version isn't sent anywhere.

—

Versions reported by the vendor

Affected version ranges reported by the assigning authority (zephyr). Independent of NVD's CPE analysis and usually ahead of it.

  • zephyrproject zephyr

    • 2.3.0 and later · before 4.3.2affected · semver
    • 4.4.0 and later · before 4.5.0affected · semver

Same product

zephyrproject: all records

Other highest-scoring records for the same primary product.

  • CVE-2023-4260Potential off-by-one buffer overflow vulnerability in the Zephyr FS subsystem
    40Plan
  • CVE-2021-3625Buffer overflow in Zephyr USB DFU DNLOAD
    40Plan
  • CVE-2020-10071Insufficient publish message length validation in MQTT
    40Plan

Published before and after this one in the same product

  • ← EarlierCVE-2026-77684Oct 19, 2026 · Bluetooth Classic HFP Hands-Free: TX buffer leak on RFCOMM disconnect leads to permanent Bluetooth denial of service
    22Monitor
  • ← EarlierCVE-2026-18748Oct 21, 2026 · Out-of-bounds read in Bluetooth Classic A2DP codec information element handling
    14Monitor
  • Later →CVE-2026-19947Oct 21, 2026 · Missing kernel object permission check in devmux syscalls allows unprivileged user threads to retarget a device multiplexer
    21Monitor

Remediation

Which version to upgrade to

Fix versions compiled from the vendor, package registries and Microsoft. Verify the vendor's note before upgrading.

Product / packageFixed versionSource
zephyrproject zephyr4.3.2Vendor (CNA)
zephyrproject zephyr4.5.0Vendor (CNA)

Exploit status

No known public exploit

No public exploit has been observed yet. That doesn't mean you're safe, only that the bar is a little higher.

Research context

For pentesters and researchers: attack profile, score disagreement, timeline, patch commits, credits, variant and chain candidates, bug bounty scope. All derived from existing data; no exploit code.

Timeline

From publication to today: proof of concept, Metasploit module, CISA KEV and fix record. Dates are as reported by the sources.

  1. Published
  2. Fix recorded+13 d
  3. TodayNov 10, 2026+20 d
EPSS, last 120 days

FIRST EPSS daily score; only changes of 0.01 or more are recorded (step chart).

Patch and commit links

Commit, PR and diff links among the references. A starting point for patch-diffing and variant hunting; fixes, not exploits.

Credits

All researchers

Finders, reporters and analysts named in the CNA record. Click a name for that researcher’s other records.

No credits in the CNA record.

Variant candidates

Same product, same weakness class, within 18 months. If the patch missed the root cause, the sibling bug is here.

  • CVE-2026-977165 days apartMissing device-pointer validation in flash_copy() syscall allows userspace privilege escalation
    35Monitor
  • CVE-2026-1236468 days apartMissing user-space pointer validation in logging syscall z_log_msg_static_create allows kernel memory disclosure and denial of service
    33Monitor
  • CVE-2026-1918516 days apartUnvalidated user-supplied buffer pointers in the I3C do_ccc system call handler allow kernel memory read/write from user mode
    31Monitor

Chain candidates

An authentication bypass and a privilege-requiring bug in the same product, published close together: combined they may become an unauthenticated path.

—

Bug bounty scope

No known public program.

Source: bounty-targets-data (public HackerOne, Bugcrowd, Intigriti, YesWeHack listings).

Technical details

Attack conditions

  • Someone with local access to the system can trigger it.
  • A low-privileged account is enough.
  • No user action is required.
  • No special conditions are required; it is repeatable.

If successful

Confidentiality
high · data can be read
Integrity
high · data or configuration can be modified
Availability
high · the service can be disrupted
Attack vector
Local
Attack complexity
Low
Privileges required
Low
User interaction
None
Scope
Unchanged
Confidentiality impact
High
Integrity impact
High
Availability impact
High

Weakness class (CWE)

CWE-822 · Untrusted Pointer Dereference

CVSS vector

CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

nvd-secondary

Attack context

MITRE CAPEC attack patterns and ATT&CK techniques for this weakness class (CWE). A starting point for detection rules and threat hunting.

ATT&CK techniques

—

Change log

  1. Fix✗ → ✓
  2. SSVC exploitation— → none
  3. Exploit maturity— → none

For records you follow, these changes also arrive as notifications. →

References

Show all references (1 more)

Vendor advisories and official records. Exploit/PoC links are deliberately left out.

All records